Search results

  1. 0

    superduty inframe?

    thinking of buying a superduty that has lost compression, i had a 94.5 powerstroke but not very familiar with superduty's. can i get the oil pan and heads off and push the pistons out with the engine still in the truck or do i have to pull it out of the truck? and also i hear all the 6.0 horror...
  2. 0

    95 engine into a superduty

    i have a budy with a super duty that has lost compression and found a powerstroke out of a 95, other than swapping injectors and turbo what issues could you run into to do the swap?
  3. 0

    front axle question

    i snapped a u-joint on the front passenger side and it beat up the shaft in the process, i found a junk yard that has an axle shaft but they need to know wether my front axle is a spicer 44 or 50, so how do i determine which one i have or will they enterchange?
  4. 0

    best programer for 2000 automatic

    a buddy jsut bought a 2000 7.3 with an auto, it already has exhaust, and a banks wastegate, he's not going to chang injectors or any thing now just needs a chip, which is going to be the best bang for the buck.
  5. 0

    better factory injectors?

    is there any set of factory injectors that could go in my stroke like out of a dt466 or 530??
  6. 0

    best programer for my 94

    what will give me the best performance gains between the superchips micro tuner and edge evolution. i have found these on ebay but i have also considered the dp tuner or ts performance(who both have 140hp tunes) but that would be a lil more expensive. anyways any thought and experiences are...
  7. 0

    injectors cutting off

    i just changed the #7 injector and i was putting the valve cover back on (while engine was running and running perfect) and when i tighten the back top bolt on it cuts off the two back injectors 7&5 and i can loosen it and tap on the cover and they will work again, i can get it a lil more than...
  8. 0

    when did the lug pattern change

    i have a set of super duty wheels that i know only fits the superduty trucks(99 and up) not the old body style (97 and bellow) but what about a 98 model E-250 van? is that the new or old lug patern? basically i am asking if a superduty wheel will fit a 1998 8 lug van.
  9. 0

    #7 injector removal

    the back injector on the passenger side is bad and i pulled it out but cannot remove it due to the heater box inthe way and i do not see any screws to take that side cover off of the heater box? so basically asking if there is a way to get that little box with the vacuum hose off?
  10. 0

    boost sensor

    my powerstroke has a rubber hose running out of the passenger side intake runner and into a little box on the firewall with electrical connectors hooked up to it, i guess this is the boost sensor? Anyways the rubber hose is dry rotted and broke can i just block it off or do i need to run a new...
  11. 0

    electronic problem

    after running into a gullie with the front end of my truck i have been having a problem with my truck randomly and frequntly wanting to cut off, sometimes it just stumbles other times it cuts completly off and then some times it will start right back up and other times it will not. i have...
  12. 0

    DIY IDM hack

    did anyone see the article in the diesel power mag about changing a resistor on the circut board on the IDM? this would be diferent than a resistor mod(edge EZ:cussing:). also would it be worth my while to swap injectors with the larger later models?
  13. 0

    what is this from cheapassdieselchip.com?

    i found this in ebay, is this an actual chip? it says it's not a resistor and list them for all models of diesel trucks so i guess a resistor is out but would this be worth the 70 bucks? here is the item eBay Motors: 94-97 Ford PowerStroke 7.3 Diesel Chip Tuner Programmer (item...
  14. 0

    94 lug pattern?

    is the 94-97 lug pattern different from the superdutys? i bought a set of wheels and tires off an 06 and the wheels do not fit my truck.
  15. 0

    edge EZ vs. banks ottomind

    i'm looking at either an edge ez 60hp tuner or a banks ottomind chip tuned for 120hp, are these accurate ratings? any body had any experience with either chip?
  16. 0

    resistor mod

    i did an 18k resistor mod on my 94 powerstroke but i didn't notice much difference at all, has anyone else had any noticable performance with a resistor mod???
  17. 0

    scorpion tuner????

    eBay Motors: Ford 7.3 L Powerstroke Diesel Chip Tuner Save on Fuel (item 160245956356 end time Jun-08-08 19:02:15 PDT) has anyone seen this? i was originaly planning on sending my IDM to dp-tuner and have it flashed with thier 80hp economy tune for 50 bucks, but would this give me identical...
  18. 0

    best mileage from a powerstroke

    what is the best mileage you guys have heard of from a powerstroke? i curently have a 94 psd 5spd, 2wd, regular cab plane jane truck weighing in at 5200lbs, about the best setup i think there is for mileage. curently i have swaped in an old gasser rear end with a 3.55 ratio a large conical...
  19. 0

    vibration during acceleration?

    i think my truck has a skip in it, it feels almost like it does when i run a tank of fuel completely out and switch to the other(duel tanks) its a bad vibration when it accelerates. what could this be, an injector?
  20. 0

    synthetic oil

    does anyone run synthetic oil in thier stroker? will it yield positive mileage gains? and also i heard that the older the oil gets the worse the mileage is (due to the oil pressurized injectors) so would i have to continuosly change this synthetic like a conventional oil? any experience or...
  21. 0

    dp tuner

    does any body have any experience with a dp tuner 3 position. does anyone see a significant mileage improvement, if so will it be consistent with all three poser levels and how strong is level 3?

Members online

No members online now.
Total: 21 (members: 0, guests: 21)

Forum statistics

Threads
30,517
Messages
266,071
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top