Search results

  1. E

    HELP!!!!!!! STILL HAVE VIBRATION

    Okay, brought the drive shaft to a driveline shop and they don't see anything wrong. They said the hanger bearing is like new and the diveshaft is not out of balance. Four new tires, three new u-joints, new torque converter. Now remember from previous posts that you can fill it from about...
  2. E

    Cruise Control

    My Neighbor bought a 96 powerstroke with an auto tranny about 4 months ago. When he bought it the cruise was not working and still isn't. Any Ideas. Thanks in advance guys.:thanks
  3. E

    Vibration

    New torque converter, 4 new tires, 3 new u-joints and still have vibration. Now here is something else I noticed. Sunday I pulled my 18' utility trailer with my 4 wheeler on it and the vibration is a lot more noticeable with a load especially between 35 to 50 mph. Do yall think it is the hanger...
  4. E

    power steering pump removal

    Need to know how to remove power steer pump. Does the pulley need to come off before pump removal or with the pump? Thanks guys
  5. E

    power steering pump removal

    need help on trying to remove a power steering pump on a 97. Does the pulley need to come off before pump removal or can it come off with the pump? Thanks guys
  6. E

    Vaccum Pump

    My vaccum pump started making noise about a week ago. Now this is the second one from Oreilly in about 2 and 1/2 years. Now I noticed thius morning that I have like an oily residue coming from the center chrome piece on th front of the pump. Do yall think that is just grease from the bearings...
  7. E

    203 degree thermostat

    Where would be a good place to get one?
  8. E

    203 degree thermostat

    What are the advantages and disadvantages of running a 203 thermostat? I notice that several of yall are running them and just curious. Thanks
  9. E

    LEDs in clearance lights

    That is on the 99+ trucks. Wondering about the obs trucks
  10. E

    LEDs in clearance lights

    Will LED light bulbs fit in our clearance lights. And if so what bulb do they use.
  11. E

    Staring to get a rough idle

    How much does it cost for a new IPR valve from Ford? I may just replace it if that is affordable route to go. Thanks for all of the good info.
  12. E

    Staring to get a rough idle

    What and where is the IPR Valve. I am still not familiar with all of these abbreviations. Some one needs to make a chart.
  13. E

    Staring to get a rough idle

    I noticed this about 2 weeks ago. Truck runs fine just just when sitting at a stop light or in park idle has a tendency to surge a little. Not all of the time though but it does seem like it is getting more frequent. Also when I change my fuel filter last weekend i noticed that there is some...
  14. E

    Cold air intake

    Can toy give me the info on where to get the tymar intake from. Thanks
  15. E

    Cold air intake

    Which cold air intake preferred by most of yall? Christmas is coming and my wife is already asking what I want so I better start getting the info needed for her to order. Also, does it make the turbo louder? A friend of mine just put one on his 06 Cummins and really made the turbo noise come to...
  16. E

    DIY cold air intake

    Has anyone made their own cold air intake for our trucks or do they just buy aftermarket. And if so did they help with the performance? Thanks for any input.
  17. E

    hub covers

    My wife bought me some from suburbanwheelcover.com for christmas last year and they really seam to be holding up. I have removed them once for tire rotating and they went back one just as good as when I got them. They are a really snug fit. I have to get a rubber hammer to put them on. I hope...
  18. E

    Oil Filters

    Which brand oil filters do yall use. Since I bought my truck I have always brought my truck to have the oil changed in it. Now I am going to start doing it myself. Just curious. I was at WALMART and I was looking at thr FRAM filters and a couple of other cheap brands. Yall let me know which ones...
  19. E

    Engine noise level

    It makes sense. I kinda thought about that but I didn't want to sound like a dummy because I wasn't sure if that would be the case. Thanks, I appreciate the info.
  20. E

    Engine noise level

    Yes.
  21. E

    Engine noise level

    I can't explain it. Just the engine while idling and under throttle is quite a bit louder than several of the trucks like mine that I have been around.
  22. E

    Engine noise level

    I have been noticing that my engine is quite a bit louder than other trucks like mine that I have been around. What do yall think is the reason? I need some professional input from all of you powerstroke gods. Thanks guys.
  23. E

    Had the tranny rebuilt

    Okay here is what I think. Brought it to a local trans shop with a real good reputation. Under 2k for the rebuild. I did not get a good aftermarket triple disc converter like I wanted but I really could't afford it. Okay first thing that I noticed is that under normal acceleration is the shift...
  24. E

    O/D Light Flashing

    Ibrought my truck yo the mechanic last Wednesday afternoon and he put the code reader on it and it was the trans/clutch slip code that came up. So now it is at the trans shop getting a rebuild as we speak. I will inform you of how it performs when I get it back.
  25. E

    O/D Light Flashing

    I already talked to my mechanic and his scanner can read codes associated with the transmission. I will reply and let yall know what the cause is. Thanks guys.

Members online

Total: 51 (members: 1, guests: 50)

Forum statistics

Threads
30,517
Messages
266,071
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top