ejectors, anyone

Fly-Guy

SDD Junior Member
Joined
Dec 26, 2006
Messages
9
Reaction score
0
Location
Atlanta, Ga.
I am considering replacing my ejectors in my 2000 F250 (somebody stop me). How hard is the job, can it be done in an afternoon and what type of ejectors should I replace them with. Do I need any special tools
 

389sixpack

SDD Junior Member
Joined
Aug 10, 2006
Messages
23
Reaction score
0
Location
NJ
I am considering replacing my ejectors in my 2000 F250 (somebody stop me). How hard is the job, can it be done in an afternoon and what type of ejectors should I replace them with. Do I need any special tools

Hardest part is cutting the hole in the roof!:D
 

95_stroker

Jefe
Joined
Mar 28, 2005
Messages
6,809
Reaction score
3
Location
Cora, Wy
I am considering replacing my ejectors in my 2000 F250 (somebody stop me). How hard is the job, can it be done in an afternoon and what type of ejectors should I replace them with. Do I need any special tools
Injectors perhaps?
How to install injectors. No special tools needed other than an INCH pound torque wrench. Basic combination wrench set, a pry bar or two, hammer, screw drivers, 3/8 ratchet and sockets, allen wrenches, a pair of needle nose pliers comes in handy as well. Set aside at least 8 hours to do the job if it is your first time.
 

Fly-Guy

SDD Junior Member
Joined
Dec 26, 2006
Messages
9
Reaction score
0
Location
Atlanta, Ga.
I'm going to start on the roof right away, my girlfriend loves to ride with me and sometimes I need that ejector button. Then I'll work on the injectors
 
Last edited:

Members online

No members online now.

Forum statistics

Threads
30,520
Messages
266,082
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top