IDM MOD

[MPLAYER]

Has anyone done the IDM mod talked about back around October? I have a '95 PSD and was thinking of doing this if there are no ill affects. Also, If you do this can you still use a chip or programmer with it or would that defeat the purpose of doing the mod. Has anyone done a run on the dyno with this? What were the results?

Great forum by the way.

 

[highfive]

Mplayer,

Keep seeing more and more ogygunians on the forums these days, finally getting some diesel pushers out here now.

Anyway, I did the IDM mod-seemed to smooth things out a little and pep them up don't know what the true result is would have to try truck same day with and without especially now that I have some injectors(she flies now)

 

[MPLAYER]

Good to hear about your injectors. I'm thinking of doing mine soon. Yah it's good to see someone from our neck of the woods on some forums.

I am thinking of doing the IDM mod but don't want to if it is going to screw things up for going to a custom burn chip in the future. I have the 10K now and thinking of going to the 5.7K. We will see how that works.

Thanks for the reply!

 

[WD40]

Hello MPlayer, and welcome to SSD.com

 

[whatabudro]

Welcome to the site

 

[rtxcoon]

Has anyone done the IDM mod talked about back around October? I have a '95 PSD and was thinking of doing this if there are no ill affects. Also, If you do this can you still use a chip or programmer with it or would that defeat the purpose of doing the mod. Has anyone done a run on the dyno with this? What were the results?

Great forum by the way.

yes,,,,I did the IDM mod. yes you can still use a chip/programmer, wont hurt a thing...even a custom burn wont matter...15 minutes and 75 cents
I couldnt tell ya about the dyno results...did too much all in between times I have dyno'd, but I think the originators of the mod claimed 10-20 rwhp....seat of the pants I could tell a little better throttle response...

 

[94f450sd]

ive done it.made a bit of a diffenece in the way it idles and in the throttle responce.but for some reason and i dont know why it went bad on me.but that might have been something else as i had a melted piston.havent put it back in since the new motor.but with the issues i am haveing at the moment i may try it tomorrow to see what happens.

 

[pacman99]

Where can I find procedures for this mod?

Don

 

[BamaSixGun]

Where can I find procedures for this mod?

Don

dont know anything about this mod, just wanted to say hi pacman, i live in albertville.

 

[rtxcoon]

Where can I find procedures for this mod?

Don

IDM MOD