JimmyDee
God Bless America
It was between 15 - 20 degrees at first and when I changed to Delvac 1 synthetic, I haven't plugged in unless its going to be zero. It starts even below that temp without plugging in but I think it is easier on the starting system if its a bit warm.Not to hijack the thread, but how cold is it when yall start thinking of plugging it in?
...even though the engine starts fine on its own?
If it needs to be plugged in at 30 - 40 degrees, you have a problem with the glow plug system.
BTW, the block heaters are 1000 watts, so if the cost of your electricity is 12 cents a KWH, for every hour its plugged in, it will cost you 12 cents. Some areas are less than that and some a great deal more.
Jim
Last edited:
We use a anti-gel in our fuel that is bought at the dealership. We plug our cars in at night if it is in the negatives. If it hits -30 or more, we plug in anytime my truck will be stationary for more then a few hours. This is a common practice with EVERYBODY in fairbanks. If you go to wal-mart, there are plugs at the parking spots. I would not plug your truck in if it is not going to get below 10 above. Someone on this thread said plug it in below 40. DO NOT DO THAT! You will start cooking your oil if you have a oil pan heater. I dont know if your truck is winterized with a oil pan heater, trans heater and battery pad or just a block heater. We see that on a regular basis with people who are new to fairbanks. They plug in when its "cold" to them and the oil pan heater keeps there oil warm and shortens the life of the oil. Your truck should have no prob starting when in positive temps. Hope this helps.