Search results

  1. strokin'_tatsch

    Competition ???

    when it comes to dodges, the story with me is RACE THEM!!!! take a 450hp dodge and put it against a 350hp powerstroke and the powerstroke usually pulls ahead!!! i know b/c my brother has a dodge at 425hp and my truck might be 350 now, but still i smoke that dang thing!! haha
  2. strokin'_tatsch

    I Didn't even miss it!

    nice goin' man. one less thing to worry about.
  3. strokin'_tatsch

    CPR fuel system going in this weekend!!

    ok mine has never leaked nor has it ever had an o-ring on it since i have had it. LoL. i got the pics uploaded so here is the link.. CPR FUEL PICS!!!
  4. strokin'_tatsch

    CPR fuel system going in this weekend!!

    got the CPR done yesterday. i didn't notice too much of a difference though. it seems to spool quicker and a little more responsive, but thats about it. hopefully it will help with the bigger injectors though. it wasn't a bad install at all since i had my brother helping me with it. well, it...
  5. strokin'_tatsch

    CPR fuel system going in this weekend!!

    i ordered my CPR last week and will be getting it tomorrow. basically i'm tired of fuel leaks and once my shrader valve started leaking i decided to order the CPR rather than try to seal the shrader with teflon.. haha ;tu any of you guys have a CPR? if so, how do you like it? I talked to Bob...
  6. strokin'_tatsch

    clutches

    Call Dan Vallance at valair clutch and talk to him about what clutch you need. he is a great guy to and his clutches are great. On a side note, the hot pedal mod is where you bend out the tab for the idle validation switch until it clicks as soon as you touch the pedal, then you have to...
  7. strokin'_tatsch

    clutches

    i have a valair kevlar/ceramic. i cant even make it blink with everything i have thrown at it. was slipping my old LUK with stage 1's and 15,000 miles, but this one is A LOT better. little grabby, but still backs smooth with a trailer. great clutch with great customer service.
  8. strokin'_tatsch

    HP Crossover hose

    who did you get your crossover line from?
  9. strokin'_tatsch

    Fuel Regulator Screen Cleaning ** Updated **

    Also one more thing crumm.. the '95 models also have another filter on the fpr. there is a black cap at the bottom of it and if you unscrew it there is a screen there you need to clean as well. mine is probably filthy b/c i haven't cleaned it since i had the truck. Were y'all using the...
  10. strokin'_tatsch

    Hit the big 70,000 mark

    :eek:that's only 200,000 miles ago 4 my truck. dang crumm, you just need to take a trip down to austin come april for the central texas dyno day to put some miles on Crummy!! put him on the dyno while your at it too! haha
  11. strokin'_tatsch

    where to get inspection cover for zf-5?

    ok guys thanks a lot. i will see if my buddy at ford just so happens to have one laying around his pile of stuff.
  12. strokin'_tatsch

    where to get inspection cover for zf-5?

    my inspection cover apparently fell off at some point and i need to get another one. is this a ford item or is there another place i can get a new one? thanks guys.
  13. strokin'_tatsch

    Figured out why my gear rollover was so loud!!!!!

    :lmao an update, with this gear rollover noise basically gone i absolutely love this clutch!!!!! if any of you are like me with the bigger sticks and all, i launch hard here and there, burnout every now and then, slip the clutch when backing trailers a little, lug the truck using the brakes...
  14. strokin'_tatsch

    Figured out why my gear rollover was so loud!!!!!

    ohhh crap!!! i was totally unaware of that!!!!:eek: i did reuse it when i replaced the seal a couple months back so that explains a lot to me. thanks patrick!! i will go get another nut tomorrow and put it on, but so far this one is still holding, i checked it today.
  15. strokin'_tatsch

    Figured out why my gear rollover was so loud!!!!!

    So after the clutch install i told y'all how loud the gear rollover was.. i just figured out that the nut that holds the pinion? to the back of the transmission was just sitting in the pinion and luckily couldn't get lost b/c it wouldn't fit between the pinion and u-joint. i took it apart and...
  16. strokin'_tatsch

    Question F-250 wheels and other upgrades.....lots of questions!

    i wouldn't lower the truck if you plan to pull with it a lot rather than use it for just driving around. The autometer guages are really good guages and so are ISSPRO, but ISSPRO is quite a bit cheaper. i personally have no problem with my DIY intake, but Dale's intakes are good and very...
  17. strokin'_tatsch

    Moto Metal's on an OBS?

    i can't do 2 different rim styles... NOT YET that is. Once i get another truck then this truck is turning into a project. i'm going to fill it up with go fast parts and hopefully a fiberglass bed, fenders, and cowl hood. then comes out the wide azz tires out back with some smaller ones up front...
  18. strokin'_tatsch

    Moto Metal's on an OBS?

    that looks really good man. mine is a 2wd single cab long bed so it just seems to me that there aren't very many wheels that will look good on it? it helps being able to see the wheels on the truck before you buy them, but idk how i would do that. LoL.
  19. strokin'_tatsch

    Help Needed 1995 7.3 PS with low power when cold and slow acceleration

    the oil temp sensor is an easy fix and is cheap if you want to try it just to knock that idea out of the question. they are like $30 from ford. i would unplug the EBPV just to make sure that's not the cause before anything else though.. check the fuel pressure at the shraeder valve at idle...
  20. strokin'_tatsch

    Moto Metal's on an OBS?

    anyone have Moto Metal wheels on an OBS truck? i'm thinking about getting the Moto Metal M0955 wheels, but i'm not sure if the OBS would look good with them. i haven't seen many styles of aftermarket wheels that look great on the OBS so i wanted to see if anyone has some on their truck. thanks
  21. strokin'_tatsch

    Help Needed papabear

    if it was the master cylinder you would have no brakes. Now, did you jack up the front to see if the front tires spin easily? I'm with BJS, you may have over torqued the bearing retaining bolt.. check them and let us know.
  22. strokin'_tatsch

    Clutch Replacement

    wow, my gear rollover is rediculous. i guess yours is quiet b/c you got a stock replacement.. i have to replace my fuel pump one of these days too. maybe wednesday.. or next wednesday... egh.. i will get to it one day. LoL:rant let us know how it does when you fix the return line
  23. strokin'_tatsch

    got bored the other day and took some videos... SMOKE VIDEOS!!!!

    me and a few friends of mine got bored so we decided to go roll some coal with the video camera in hand so i figured i would share them with y'all. enjoy! Stacks rollin' coal givin' it a little boost(my truck) Roy's superduty tailpipe view roy takin' off roy drivin' by
  24. strokin'_tatsch

    Clutch Replacement

    does it do it cold? could be an ipr issue. like i said, my ipr o-rings went out so a friend of mine that works at ford gave me a used ipr that was still good that i swapped in it and it lopes now when it's warmed up a little bit. pull the codes and see if you have oil codes? how do you like...
  25. strokin'_tatsch

    Bigger injectors ?

    you could run stage 2's on the stock hpop, but the hpop wouldn't keep up with the demand well enough to take full advantage of the 2's. if building the injectors is something you may be in to trying then check out www.diy-injectors dot com

Members online

Total: 103 (members: 2, guests: 101)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top