Search results

  1. T

    got my 2008 f250!!!!

    nice truck very nice good luck with it... what is the monster rig next to yours?
  2. T

    weight of my 06 f250

    hey Boys what is the weight of my 06 f250 4x4 extended cab short bed auto diesel I know this tool box who thinks his nissan maurano is close to the weight of my 3/4 ton truck...go figure... I want to tell him after I park on top it. :roflmao I looked on the ford site and could not...
  3. T

    Pic of 08

    truck mirors the mirrors look to small
  4. T

    High Idle Switch

    BCP I just helped a friend with a 2007 f250 with this mod, so it does apply to the newer rigs if anyone wanted to know.:D
  5. T

    snow plow prep???

    plow prep package MY 06 came with a factory plow prep package, I am also unaware of the upgrades to the truck vs not having the package. Im curious to know as well.
  6. T

    Anyone heard about the bulletin for 6.0 injector torque?

    blue smoke is that blue smoke normal during the warm up mode?
  7. T

    High Idle Switch

    PTO high idle I did the BCP mod I dont have upfitter switches so I used a small LED switch and tied in to the source next to the Diagnostic port. sweet... warms up much faster
  8. T

    What are the temps like in your area?

    temps 5 right now on the east coast in CT.. thats Fin cold...glad I bought the remote start...:thumbs
  9. T

    ULSD causing fuel system problems? U decide.

    ULSD http://www.clean-diesel.org/faqs.html
  10. T

    block heater tripping GFI

    block heater what is the amperage rating of the GFI and the braker on the circuit? sounds like its a 15 amp circuit which probably has some other things in the same circuit that may be operating when you plug in the block heater. the total amperage draw is most likely more than 15 amps and the...
  11. T

    CJ-4 OIL & ULSD

    cj-4 8.99 a gallon
  12. T

    CJ-4 OIL & ULSD

    cj-4 The mobil devlac 1300 is CJ-4 compliant. I found 6 gallon bottles on the shelf at autozone. 4 were cj-4 the other 2 were not. I guess they updated to the new specs.
  13. T

    remote starters

    remote starter cool Im going to try that this morning...:sly
  14. T

    remote starters

    remote start I have a compu star basic one way system. It has a lonf delay for the glo plugs and runs for 25 or 45 min. I use 25 min. It allows me to have remote unlock/lock too. The dealer put it in for free but I wish I had paid someone to do it. I would rather have a 2 way system with...
  15. T

    by pass oil filter

    I searched the site for info on synthetic oil and conventional oil and found what I was looking for. I also read about the oil by pass setup. I searched and did not find as much info as I wanted. can you guys tell me about the by-pass systems and when and why they are used. and what they...
  16. T

    synthetic oil

    Guys I need to do the 1st oil change on the 6.0 psd. I would like to use synthetic to extend the changing intervals. not sure how long I can get with synthetic??? I have seen the mobil 1 5w-40 online but not in the stores I have seen the 15w-40 "delvac" in the parts store the mobil...
  17. T

    Lets see those SuperDuty Trucks!! (OFFICIAL PICTURE THREAD)

    06 6.0 PSD Here's mine.
  18. T

    brake controller

    Hi guys My new 06 250 has the built in brake controller. I have always used the conventional style which you self adjust depending on speed and conditions. The new one adjusts depending on how hard you apply the brakes but it has a gain control to adjust the maximum braking applied during...
  19. T

    new 06 6.0

    sensors thanks guys with the search menu I found the port for the tranny sending unit location, seems real simple... the EGT location you say is on the manifold.. does that require drilling and tapping? is there a location that will give accurate readings that does not require tapping.. I...
  20. T

    new 06 6.0

    gauges is the tranny temp gauge a mechanical setup or electrical with a sensor, does the sensor get installed in the pan or tranny body? drilling the pan required? same questions for the EGT... manifold or O2 style on gas engines? any pics?
  21. T

    new 06 6.0

    gauges So the stock boost and tranny temp gauges are not good enough... ?
  22. T

    new 06 6.0

    gauges what type of gauges are you guys talking about my rig has indicator gauges, no idiot lights engine temp and tranny and oil PSI
  23. T

    new 06 6.0

    Hi guys here is my new rig...:burnit 2006 250 SD XLT chrome package I have always maintained my stuff... never had a Diesel... what is the best oil to run in it... interval changes? fuel filter changes? someone told me to let the truck idle down for a while after long trips to...
View older results

Members online

Total: 52 (members: 1, guests: 51)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top