Search results

  1. M

    Clutch Master Cylinder Bleeding Problem

    actually i did not do that. i know its creating more trouble for me now, but will i ever get all the air out...?
  2. M

    Clutch Master Cylinder Bleeding Problem

    well i had to change my clutch master cylinder, and i cant get this thing bled to save my life. we have gravity bled it, power blead it, and nothing! i have only 2-3 inchs of pedal and thats it. any ideas, lets hear em'!!
  3. M

    Question 94 F450 E Brake Pads Needed

    well it looks like i need to come off the cash and buy the unit. i hate to spend it but i need it. thanks for all your information, it was very helpful!
  4. M

    Question 94 F450 E Brake Pads Needed

    thanks for the heads up! i was about to order the pads and install them in the drum but Ford wanted $280 or so for them.....i think a bit high. Can they be rebuilt with minimal ease?
  5. M

    Question 94 F450 E Brake Pads Needed

    Hey all, i need some brake pads for my 1994 F450. this is in the unit that is on the back of the transmission. this truck has the 5 speed, 2WD. Where is the best place to buy them besides OEM.....i think that Ford is a bit proud of them with there price. thanks, Steve 419-210-0438
  6. M

    2000 Excursion Rear Brakes Sticking....?

    these were just dirty, cruded up. they are are clean and work like new.
  7. M

    2000 Excursion Rear Brakes Sticking....?

    well, we he dug into it and found that the calipers we sticking. the pins were free, but the calpiers were the problem. 2 pistons on the drivers side, and 1 piston on the passengers side.....took em off, cleaned them up, blew them out.....they work fine now. thanks guys!! Steve
  8. M

    2000 Excursion Rear Brakes Sticking....?

    hey all, my father in law has a 2000 3/4 ton excursion and the read breaks keep sticking and making the wheel assembly hot, by even just driving around the block. we have replaced the master cylinder already. we did take apart the rear lines and they did blow through....however, the rear...
  9. M

    Oil Temp Sending Unit.....

    where is this located so i can add this to my other gauge pod? i just need to know where to bolt the sensor into at??? i did get the other 3 gauges installed, all work fine and look way sweet! thanks for the help guys.
  10. M

    Need Help With Guage Install

    thanks guys! i got the EGT sensor done. boost will not be a problem. where is a good place to tap into for the oil pressure sending unit? heck, i might already have a similar one on it?? where would i find this beast??
  11. M

    Need Help With Guage Install

    ok all, i am finally putting in my guages.....boost, EGT, and oil pressure on the pillar post. where is agood spot to put in the sensor for the boost and the EGT?? i might have asked this a while back, but i am just now installing them. i hope tomorrow is the day! i already have the post...
  12. M

    94 Injector Needed Code AA

    well, i have a miss and need a good injector, new or rebuilt, either way. i need one at this time........where to go...........?
  13. M

    Need E-Brake Cable.....Where To Look??

    i just called ford and $28 gets the part, and it goes from the pedal to the trans brake. they said no cables to the rear wheels on this truck? dont know, never looked. and here i thought i would be having a $200 repair!
  14. M

    Need E-Brake Cable.....Where To Look??

    this one goes from the e-brake inside the cab and seems to be about 3-4 foot long and goes to a trans lookin brake behind the trans. maybe that same pedal does the rear drums and also the trans?? not sure, i did not look that far. ill check with ford and see what the damage is. i need my e-brake...
  15. M

    Need E-Brake Cable.....Where To Look??

    i need to replace my e-brake cable on my 94 F450, 5 speed. it is a short cable that goes to the trans. where can i find one??
  16. M

    No Turn Signals Or Brake Lights??

    i have also changed the flasher with a knowing working one, and no help there either. platinum01, what fuse was out when you changed yours? inside the dash, or under the hood? thanks
  17. M

    No Turn Signals Or Brake Lights??

    Hey guys, question for ya..... on my super duty, i have no turn signals or break lights? i have replaced the turn signal switch in the column hoping this would take care of the problem, but it was a $140.00 part that did not fix my problem. yes the fuse checks good, and i replaced it with...
  18. M

    Starter Solenoid

    where is the started solenoid on this 94 PSD? i see a solenoid on the pass. side fender, but it does not apear to be for the starter, as the power cables are not big enough. i done a repo tonight, parked the truck at the shop, went and done another drive by for another repo, and i went back...
  19. M

    Headlight Mod

    i meant to add, i had a 92 F150 show truck with the true HID system, about $350 for a quality set now a days. this will give you the best light possible, and only draw about 35 watts from your stock system. simple install, and VERY bright. that is if your after bright lights that wont blind...
  20. M

    Headlight Mod

    AGREED!! we actually manufacture these and market them. check out www.highbeamkits.com (it takes you to our web site) for the 92-96 trucks we can have the factory fog lights come back on (lightning models) and be safe, but not the low and high beams. even the 97-07 F150 & 99-07 Super Duty trucks...
  21. M

    94 chip install

    where is a good place to pick one of those up at? i will eventually be needing one, along with a good air intake set up. a little at a time!
  22. M

    94 chip install

    no gauges in yet, hopefully this weekend. stock down pipe as far as i know. i have not checked. i would rather the no start be on one end or the other also.
  23. M

    94 chip install

    well today i got to use it. i had 3 repos, and the switch is set up from left to rigth: Stock, High Idle, No Start, 50, 75, 100. when i switch it while running, it will go to the 50, or 75 and i can feel an imporvement. i do not have to shut the truck off to use the 50, 75, or 100 when im in...
  24. M

    94 chip install

    stock, high idle, no start, 50, 75, & 100. works like a champ!
  25. M

    94 chip install

    Just this evening i got it in! works great! please follow the above links, and take the inner fender screws out so you have the computer on your table for a good cleaning!! i took out the E brake, and saw what i needed to do, and went the long way for safty. took about 1.5 hours, from start...

Members online

No members online now.
Total: 47 (members: 0, guests: 47)

Forum statistics

Threads
30,517
Messages
266,071
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top