NVJAY775
SDD Junior Member
I have a 2000 f250 4x4 auto, Wildman 4 position chip, and a few other things. I was under the dash looking for the wires I need to hook my trailer controller into and accidentally unplugged the harness plug from the chip control knob to the chip. Which plugs into the computer. The truck was idling at the time. When I disconnected the harness the engine died immediately. I tried to reconnect and restart but nuthin. I disconnected the batteries for a while, reconnected and still nuthin. It cranks fine, but will not fire. I also tried unplugging the chip from the computer and it still won't fire. Also checked the fuses under the hood and also inside the fuse panel in the cab and everything is good. I hope nothing happened to the computer...
Any thoughts guys?
Thanks in advance Jay
Any thoughts guys?
Thanks in advance Jay