PTO idle up mod - 2003 Excursion

[TexasExcursion]

FWIW I did this mod on my 03 and it works perfect. No ebrake or hood closed needed. I would bet your connection is loose

Success! Blacksheep, we're not worthy

I stopped by my dealer and asked the service guy for a harness. They didn't even squak at what I wanted to do because I had the Ford body builder printout with me, they were actually surprised the X didn't have the wire in the PCM harness to begin with.

Either way, though, it works like a charm. It even works with the remote start/cool down timer on the turbo. Just have to be careful not to leave the switch on after shut down....wouldn't want a cold motor up at 1200 RPM's after a start (Thanks, Blacksheep).

Scott, I'm sending you a PM. I picked up a spare harness for you.

 

[DaveBen]

I have never used the ebrake with mine. Works like a champ. You might try getting the wire on the other end of that connector and splicing in a wire.

Dave

 

[blacksheep]

 

[ScottK]

BlackSheep Thanks for chiming in on this
TexEx.....My job has taken off and we are busier than all get out.
I sent you a PM, I'll try to work in some time in the next few weeks to do this mod. I'm out of town all this weekend....bummer!