Search results

  1. K

    What I should be doing.

    Hey thanks Crumm. I'll see if I can get in touch with him just for chits and giggles.
  2. K

    What I should be doing.

    That would be the way to do it to start. I figure it cant be to hard but I wouldnt even know where to start. I been toying with some ideas on a new front bumper for my truck. I would like to be able to get it chromed when I'm done er heck build it out of stainless!! I've made a couple over the...
  3. K

    What I should be doing.

    Well not everybody has stopped buying stuff for mods for their trucks. Me especially! Heck in the last month or so I've dropped a couple grand probably (heck I know I've dropped at least 2) on various things from new tires all the way to some cool switches I found to run accessories off of...
  4. K

    What I should be doing.

    Instead of spending my days under a welding helmet I should be trying to start my own business in MY area to carry some the cool things we need to do mods on these PSD's. The closest shop that carries anything like the stuff I've been looking for is 100miles away. Everytime I call or check...
  5. K

    Help Needed 08 Tow mirror wiring diagram

    No problem! Just wish it was me needing that info and putting the mirrors on my truck.:D Post some pics when you get them installed if you can.
  6. K

    Help Needed 08 Tow mirror wiring diagram

    Heres a link I've had bookmarked for awhile. This mod is still on my TO DO list (which the more I stay on these forums the longer it gets). Hope this helps!New Mirror installation
  7. K

    Question Hot water

    I probably had $20 bucks in my AC mod all together.
  8. K

    Question Hot water

    It depends on which vacuum line you tie into. The red I think will only give you heat on the windshield and in the floor. But if you tie into the white vacuum line behind the glovebox it only cuts the heater core off in the max ac position. Explorers had the valve too. I got mine off a '96 model...
  9. K

    Question Hot water

    Are you talking about the mod where you tie into the vacuum lines behind the glovebox or are you just wanting to put a shutoff valve in the heater hose?
  10. K

    Ball joints and wheel bearings

    The needle bearing in the hubs are the same as a '75 f150 with a dana 44. Just to put that out there.
  11. K

    Accessory switches

    I was thinking of trying to squeeze two switches on each side in those places. I just emailed him back with my order and I ordered up a few different mounting brackets because I'm not sure of my location for the switches. I figure with those prices and the way I'm adding stuff I'll eventually...
  12. K

    Accessory switches

    Nice. You think they would fit in the space between the steering column and the 4x4 switch, right below the gauges? I was looking to put two on either side. I think these switches are cool because they are labeled. I SOMETIMES let other people drive my truck and it would be nice for them to know...
  13. K

    Accessory switches

    So I'm still in the process of doing frontend upgrades. I'm adding a set of PIAA driving fog light combos. They would have been on this weekend, but me being butter fingered, its gonna cost me another $75 for a replacement light (Ebay saved the day on a item that PIAA hasnt made in 6 years)...
  14. K

    Ball joints and wheel bearings

    Well got everything but the new cyroed powerslots installed today. The rotors are on backorder. Found out the main reason my ESOF hubs werent working. The thrust washer with the groves in it was turned backwards and the yellow oring...MIA! Apparently the PO didnt know what they were doing...
  15. K

    Petition Want to possibly lower oil/fuel prices via petition?

    Yes, its all speculation. Just like today OPEC mentions $140 for a barrel and PRESTO...There we have it! If its not the dollar that they blame it on, then its supply and demand, then somebody mentions $140 to $150 a barrel and there we have it. What do ya do? Still how does drilling for oil here...
  16. K

    Ball joints and wheel bearings

    Damn wish I'd seen that before I had to go here and there to round everything up! I'll know better next.That kit listed a seal I had forgotten about so looks like its back to ford! I dont think 76k is alot of miles on it. If the needle bearings are the problem, I already have them to be ready...
  17. K

    Ball joints and wheel bearings

    The needle bearings are replaceable if that is the problem.
  18. K

    Petition Want to possibly lower oil/fuel prices via petition?

    Yeah, I know its the idiots..(I mean speculators) that cause the most of this problem. My question is that if we drill here, its our own oil, how does it not effect price, since we dont have to buy from OPEC?
  19. K

    Ball joints and wheel bearings

    You dont have to buy the whole bearing hub assembly do you? Just the needle bearings?
  20. K

    Ball joints and wheel bearings

    Well I had been having some noises when I turn to the left at speed and every know and then when I came to a stop. So I jacked the truck up to check things out and looks like I'm gonna need passenger side ball joints and driver side wheel bearings. The bearings have a little play in them. Could...
  21. K

    Petition Want to possibly lower oil/fuel prices via petition?

    Thats what I had posted about in my has anyone else seen this thread but I took the link out cause I'm still kinda new here and it was kinda politics related. I have already signed it. I did catch some flak on it.
  22. K

    Deep Cycle Batteries

    Thanks for the info.
  23. K

    upfitter switches

    Thank guys. Anybody got any pics of the install? I think I remember reading that you had to cut the panel to fit the older trucks.
  24. K

    upfitter switches

    I'm sure its been discussed but I'm looking to possibly install the '05 and up switches in my '03. I've tried searching here and other forums but cant seem to find anything. Anybody know of anywhere to get the switches and panel? Thanks.
  25. K

    Upgraded frontend

    Its actually the cover inside the light itself that covers the bulb that had came out of the holder. The lens is still sealed up tight.

Members online

No members online now.
Total: 53 (members: 2, guests: 51)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top