Search results

  1. McDizzle

    How to disable automatic headlights

    Hey Guys! Long time since I’ve been on this site! I bought a 2008 F-350 at an auction that was a fleet truck and the headlights come on whenever it is put it in gear. I’m trying to figure out how to disable this so I can use the headlights with just the switch on the dash. Anyone know how to...
  2. McDizzle

    Question Need advice on a 4" lift

    I was just looking and im wondering now if I should go with a hanger kit and just spend the extra money and buy two factory front leaf springs and then get the 4.5 icon hanger kit with the rear blocks or would the icon kit with front springs be a good way to go?
  3. McDizzle

    Question Need advice on a 4" lift

    Well about 3 years ago I put a rough country leveling kit on my truck and in about a year it sagged and now all the shocks and everything is going to the pits. After alittle research on here ive come to the conclusion to maybe get a ICON 4" spring system to replace the front spring and give my...
  4. McDizzle

    Is a new bed gonna look stupid on my truck?

    ahhhh so id need a 2010 or older then, i wonder how hard its gonna be to find a nice one.
  5. McDizzle

    Is a new bed gonna look stupid on my truck?

    I have a white 2000 SD and my bed is all rusted out around the wheel wells and tail gate and i was looking at new 2011 white take off beds. What im wondering is will the white from a new bed match the white of my 12 year old truck? or will it not be to noticable........
  6. McDizzle

    2000 F-350 died on me!!!

    Found my leak it's the plug directly below the the oil lines, I believe this is the "non servicable plug". The hoses stay dry and the back plug stays dry. It looks like the o ring is slightly pushed out on the "non servicable plug".
  7. McDizzle

    2000 F-350 died on me!!!

    What would be my best bet to get a repair kit and try and replace the plug or get a new pump? Also if I did go the pump route does the adrenaline pump come with the fittings installed already or do you need new ones or re use the old ones?
  8. McDizzle

    2000 F-350 died on me!!!

    I can see it dripping from the plug below the oil lines on the drivers side, I cant tell if the back plug is leaking im gonna check it out in the morning with some day light.
  9. McDizzle

    2000 F-350 died on me!!!

    I finally got some time to check my truck out today, so I refilled the engine with oil and cranked it for a few and got it running and found a steady stream pouring out around the started and then under further investigation I found that the HPOP is leaking! So my next question how are is it to...
  10. McDizzle

    2000 F-350 died on me!!!

    Thanks for reply Roy, if that is the problem is there a chance for much damage to occur?
  11. McDizzle

    2000 F-350 died on me!!!

    Well I was driving home last night and my truck shut down on me. I slowly coasted off the road and opened the hood and oil is everywhere!!! At first I thought it was fuel but under further investigation its oil. When I pulled over I first tried to crank it and it seemed to crank fine but wouldnt...
  12. McDizzle

    major malfunction help

    What is that?
  13. McDizzle

    major malfunction help

    Just had the batteries load tested and both are good, im gonna clean the connections really good and drop em back in and see what happens.
  14. McDizzle

    major malfunction help

    I have a 2000 350 and have had an edge evolution on it for the last 1 1/2 to 2 years and all of a sudden it said error 150 cant bridge something. then when i turned the key on the truck started clicking like crazy in like 5 different places and the dome light was flashing and nothing when i...
  15. McDizzle

    4x4 bed decals

    Anyone know where i can locate some 4x4 bed decals my sd doesnt have any. looking for some factory style ones.
  16. McDizzle

    No Brakes

    found its my hydraulic line from the powersteering pump to the hydroboost had a hole worn in it from the shock tower and i lost all my pressure.
  17. McDizzle

    No Brakes

    Well last weekend I replace the rear brakes calipers, pad and rotors bled it and drove it all week long about 300 miles with no issues. Then last night I jumped in the truck and started it and took off and hit the pedal and nothing pedal went to the floor before I got very little pedal to stop...
  18. McDizzle

    No Brakes

    Well last weekend I replace the rear brakes calipers, pad and rotors bled it and drove it all week long about 300 miles with no issues. Then last night I jumped in the truck and started it and took off and hit the pedal and nothing pedal went to the floor before I got very little pedal to stop...
  19. McDizzle

    Fix your Overhead Trip Computer

    Nope the link isn't working for me either.
  20. McDizzle

    White smoke when starting in cold

    When I plug it in a usually starts pretty easy, but this last weekend I left the truck sit from friday to sunday. Plugged it in saturday night and sunday morning it still started super hard had to turn it off and on about 5 times before if barely started. Then last night I plugged it in and it...
  21. McDizzle

    White smoke when starting in cold

    Hey guys my truck is starting super super hard now that its getting colder and was wondering how do I know when it's my GPR or the plugs themselves?
  22. McDizzle

    Shimming the FPR Wiki

    I was just checking out the wiki for shimming the fpr and the pics arent showing up anyone have them? Also anyone have any experience with this mod whats to expect?
  23. McDizzle

    edge evolution

    i had it on my truck for about 2 months before the i blew 2nd gear and burnt all the clutches in extreme setting,time for a rebuild my trans only had 125,000 on it. oh well $2,000 were back at it lol:cool: its got some power not as much as i thought it might though.
  24. McDizzle

    97 column problems

    you defintily need a third hand, putting this thing back together is a b%^&$h, the springs are the worst part ERRRRRRR:rant
  25. McDizzle

    97 column problems

    whats a "torque-it-until-the-heads-come-off bolts" lol im not good with the techincal names

Members online

No members online now.
Total: 199 (members: 0, guests: 199)

Forum statistics

Threads
30,512
Messages
266,061
Members
14,625
Latest member
woodrow58

Latest posts

Top