Search results

  1. mech2161

    Lets see those SuperDuty Trucks!! (OFFICIAL PICTURE THREAD)

  2. mech2161

    After run update

    Most of you had seen the engine test run. It's been a long week trying to decide what to do with the injectors. Do I go B codes or try to get more from the hybrids. After conversations with David at DI Performance and Jim (DZLJIM) at Rosewood Diesel it will be the hybrids. Sworn to secrecy I...
  3. mech2161

    Clearence around filter

    It's fine, mine's the same way.
  4. mech2161

    engine test run on stand

    Got the engine back together enough to test run it. Now I can pull it back down, send the injectors out and install new springs and push rods. I made a 42 pin harness extension and extended the fuel lines. It's up close to the front of the truck so I could use the starter harness for the...
  5. mech2161

    Stolen Parts

    The police came over today and said that someone got J.D. Byrider. They took 24 catalytic converters off the cars in there lot. Moral of the story is if you live around North Jackson, OH put a straight pipe on.
  6. mech2161

    Stolen Parts

    Thanks a lot guys. I am 2 miles west of the 80 76 split. Just west of Austintown and Youngstown and about 30 miles east of akron. Justin
  7. mech2161

    Stolen Parts

    I posted it for a friend. I'll try to get an address. I think they do FedX shipping.
  8. mech2161

    Stolen Parts

    Any help would be appreciated! Last night between 11:30pm to 3:00am someone cut the fence around our new shop and broke into 3 of our driver’s vehicles and my pulling truck. Since I have the motor out some parts were just locked in the truck. This included 2 turbos, radiator with fans...
  9. mech2161

    Clutch Questions

    Labor time pays 3.8 hrs.
  10. mech2161

    fuel filter

    F81Z9N184AA
  11. mech2161

    banks vs 6.0 intercooler for a 7.3

    Turbonetics 7.3 replacement intercooler upgrade 50% more cooling volume than stock @20+ PSI of boost, the pressure drop was less than 1 PSI and over 200+ degrees of temperature
  12. mech2161

    banks vs 6.0 intercooler for a 7.3

    No the coolers are new to them. I've got pics, click the link at the bottom. second page.
  13. mech2161

    banks vs 6.0 intercooler for a 7.3

    I would go with a Spearco as the one I have. You can even go with the 6.0 size in a direct fit. The stock 6.0 is an improvement but nothing like the Spearco unit. Spool up is quicker and gives a drop in egt's. Give Larry a call http://www.discountpowerparts.com/ I'm sure he can fix you up. The...
  14. mech2161

    Exhaust question

    Quality~! Kinda like the difference between a grade 5 and a grade 8 bolt. The 409 will keep it's shine and last longer.
  15. mech2161

    front hitch Recomendation

    http://community.webshots.com/photo/549831192/2513166980080528090NuevBf No drilling. Putnam
  16. mech2161

    Exhaust question

    409 is by far the best. Give Larry a call he can get what ever you need and is a site sponsor. http://www.discountpowerparts.com/
  17. mech2161

    DTC.... 0478/0470

    Check here for code eliminators. http://www.blackclouddiesel.com/Ford/codepigtails.htm
  18. mech2161

    Starting to plan injector project.

    "I've already got a plan for sucking fuel out of the cylinders. My BD exhaust brake came with a HD vacume pump. I can hot wire the pump to run on demand. I can also make a vacume cannister to collect fuel sucked out of the cylinders. If it works half as well as I think it will, it'll be sweet."...
  19. mech2161

    need some help on a decision

    Location makes a difference in price, Check online here http://www.kbb.com/ or here http://www.nadaguides.com/home.aspx?l=1&w=28&p=0&f=5000&aid=58398&iid=51329&nozip=1 Make sure to have the ball joints checked. This is a big ticket item if they need replaced.
  20. mech2161

    help....slave cyclinder, clutch

    Why disconnect it? Push the slave cylinder in and turn. It removes from the bell housing easily. Leave it connected and let it hang.
  21. mech2161

    Good Price on Exhaust?

    Give Larry a call here. http://www.discountpowerparts.com/ He's got good prices on MBRP and MagnaFlow.
  22. mech2161

    Lets see what y'all think

    K: LFC 32/DTC B1932 - Driver Air Bag High Resistance/Open Ckt Possible Causes Driver air bag high resistance could be caused by: a poor connection or corrosion in the driver air bag module circuits or the air bag sliding contact. an open circuit or high resistance in the air bag...
  23. mech2161

    Wheel bearings???? questions

    If your truck does not have ABS you can still use those hubs and cut the wire of or zip tie it out of the way. They are cheaper.
  24. mech2161

    Lets see what y'all think

    They let the steering wheel turn and busted the clock spring. Take it back and demand the fix it. This is something done by a rookie. I'd also find another shop for further use.
  25. mech2161

    Support those that support the sport!

    :thanks It's done and ready to load on the trailor.:burnit

Members online

No members online now.
Total: 165 (members: 0, guests: 165)

Forum statistics

Threads
30,512
Messages
266,061
Members
14,625
Latest member
woodrow58

Latest posts

Top