Search results

  1. Kelly Hancock

    Automated BioDiesel Processor

    Bill. I spoke with Graydon in person three weeks ago about this processor. He loves it, then again he is a distributor. I cant affort $8000. He says you basically add the oil, the methanol and catalyst, turn it on and walk away. Come back in two days and it is washed, dryed, and ready to...
  2. Kelly Hancock

    ABS on Excursion

    Thanks for the responses. I will watch the light but it does not stay on. A few months back I changed out the brake fluid with the blue stuff(cant remember the name) I did it by sucking out the resevoir and then adding fluid and bleeding all four out. But this issue that my wife has...
  3. Kelly Hancock

    ABS on Excursion

    Ok. My wife when she drives the X says that at times when she hits the brakes she slides. Wasnt sure what she was talking about. I had just put on new rotors and pad and the thing stops great IMO. As I thought more about it should the ABS kick in if the truck slides? When I hit the brakes I...
  4. Kelly Hancock

    Seats

    I did just what you are asking. The heating element on the drivers side was not functioning when I brought it back from Arizona (they didnt need the heat down there) You can buy just the seat cushion. In mine (2000) you have to because the element is glued to the cushion. I changed it out...
  5. Kelly Hancock

    Sonnax Valve w/tricumulator install

    Thanks all. I think I am going to get'r done.
  6. Kelly Hancock

    Sonnax Valve w/tricumulator install

    Firmer shifts but not a jerk when it does? I put a hypertech program on once and set it to firm shifting and it would jerk your head back when it shifted. Its not like that is?
  7. Kelly Hancock

    Sonnax Valve w/tricumulator install

    I asked this to CHPmustang(Bill) some time ago but have since deleted the response. Could someone explain to me (again) the affects of this mod? Has anyone else done this improvement? thanks
  8. Kelly Hancock

    Spring Swap

    Hello All. I am needing some more information. I picked up a set of front springs off of a 2004 super duty and was told they were V codes. I am assuming the guy was correct. He also gave me 4 inche blocks for the back. I have read that some have gone this route. My question - If I can...
  9. Kelly Hancock

    Door Ajar Light

    I did this to mine last year. Mine was just the opposite. The light would not come on when th door was open. I had to replace the switch. Pretty easy to do. The door panel comes up and off and you are able to reach up in there and take out the switch. In order to do that you have to push...
  10. Kelly Hancock

    Helwig - Before the lift or after?

    I have all the parts to lift my X and I am planning on doing that when the weather is a bit warmer. I got my hands on a pair of V codes off a 2004 super duty and 4 inch blocks to go with them. When I get around to it, I would also like to put on a sway bar. Seems I read somewhere that I...
  11. Kelly Hancock

    Driver side heated seat not working?

    When I bought my Excursion out of Arizona the seat heater did not work. It wasnt an issue with the previous owner so they didnt worry about. I brought it back to Utah and it is nice to have. I took the cushion out to find that the element had burnt out. There is part of the contour of the...
  12. Kelly Hancock

    Bio diesel first run

    THanks houndog. Our first batch was washed for two days and the water changed three times. We alsl bubled for a couple of days. We were not trying to hurry our first batch at all. THe guy that processes with me, I being the oil chaser, he being the processor, bubbled up through the water and...
  13. Kelly Hancock

    Bio diesel first run

    I am running my first 8 gallons in my 2000 excursion. I am now getting the "water in fuel" warning light. Has anyone had this experience or do I just have water in the fuel. I drained the bowl and the light didnt come back on the rest of the night. But now this morning I am getting the light...
  14. Kelly Hancock

    Shopping for a Cargo mat

    I purchased mine from someone off of Ebay. I believe it is a weathertec. It was one of the first things I bought after getting the X. They fit perfectly and the tan color matches great. It covers the complete area of the cargo bay. Mine has a 3-4 inch lip. It works great.
  15. Kelly Hancock

    Heated seats

    My heat went out completely when I bought mine (2000 psd) The seats in the 2000 have the element glued right to the foam cushion. You have to change the whole cushion which was about $150. There is a section in the seat the dips down so the support bar going through it holds the leather...
  16. Kelly Hancock

    Front seat heat

    I am jumping the gun here just because I am in front of my computer and can ask this question. Although I have not taken the time to check into it further just yet. Anyway here goes. Earlier this year I posted the question about losing the front seat heating element. I purchased a new pad...
  17. Kelly Hancock

    I'm thinking CPS - HELP

    My wife has said that a couple of times she has had the truck just die on her. She we slowing to a stop and in killed. It did start back up though. Today she was waiting for my daughter at school and it died then also. Now she just called and was out on the freeway and it was acting really...
  18. Kelly Hancock

    7.3 milege dropping

    My X is stock and I am getting 14.5 - 15 even when pulling the boat. I had it chipped with a hypertech last year but took it off. I wasn't sure it was the right one for it. Now I wished I had kept it because the best I saw was 18 on a long trip.

Members online

Total: 277 (members: 1, guests: 276)

Forum statistics

Threads
30,516
Messages
266,068
Members
14,627
Latest member
castellscl

Latest posts

Top