Search results

  1. PSDfreak

    Is This A Good Chip?

    Yes the TS is a very popular chip...Goodprice too @ $260 -Casey
  2. PSDfreak

    Installing HPOP....Leave Springs in or Out?

    I have had the HPOP in for a week now (havnt been driving too much due to a fuel leak which will be fixed tomorrow) and have noticed NO problems with leaving the springs out...In fact with the new HPOP and IPR the truck starts MUCH faster...The other day I went to start the truck (had been...
  3. PSDfreak

    Installing HPOP....Leave Springs in or Out?

    Yeah I am back up in chico..FINALLY putting the HPOP in...haha...I installed it without the springs following some advice from some other guys so i guess I'll see what it does over the next week and if need be I'll put them back in. Unless anyone sees the possibility of this doing any damage...
  4. PSDfreak

    Installing HPOP....Leave Springs in or Out?

    I am installing a new HPOP in my truck...for anyone that has done this: The little springs in the oil supply fittings (im guessing might be for drainback)...should I put them back in or just leave them out? They look kind of restrictive but I dont want to mess with drainback issues everyday...
  5. PSDfreak

    97 F-350 Exaust Question

    Correct me if I am wrong but the CAT is going to be more of a restriction than the muffler...I'd kill the cat before the muffler -Casey
  6. PSDfreak

    DUAL Exhaust

    I dont have a comment on the dual exhaust..just wanted to say hey and thats a gorgeous truck you've got...Yuba City? Im just up the road in Chico. -Casey
  7. PSDfreak

    DIY cold air intake

    I got a tymar intake from Dale Isley...I noticed the turbo spooling up faster, and the first night i had it in I drove 200 miles and noticed an increase of 1.9 mpg. I love mine... -Casey
  8. PSDfreak

    97 mirror upgrade

    me too...plus the blind spot is quite big...not to mention i think it looks a little goofy....just my opinion. Are you trading out the electric paddle mirrors or do you have the manual metal ones? They have the goose neck mirrors too. -Casey
  9. PSDfreak

    Tulelake, CA Pull This Saturday? (9/8/06)

    Are the pulls up in the Tulelake this saturday!? 9/8/06??? If so im there! -Casey
  10. PSDfreak

    Centurian Power Stroke?

    Any chance of finding one with a ZF-5 in it??? Just curious...
  11. PSDfreak

    '92 7.3 Turbo IDI...Fuel Filter Light

    My neighbor has the above listed truck....Fuel Filter Light came on today...He changed the fuel filter...its still on....I think he said that as he accelerates the light glows brighter... I really know very little aboutthe details of the IDI...Any advice gentlemen??? Thanks, Casey
  12. PSDfreak

    '92 7.3 Turbo IDI...Fuel Filter Light

    My neighbor has the above listed truck....Fuel Filter Light came on today...He changed the fuel filter...its still on....I think he said that as he accelerates the light glows brighter... I really know very little aboutthe details of the IDI...Any advice gentlemen??? Thanks, Casey
  13. PSDfreak

    Manual hub problem

    If the hubs are locked the transfer case is spinning too and they are chain driven (so I was told)...So if you are talking about he noise you hear if you are coasting with the hubs locked going down the road....I would bet its the transfercase, and thats normal. -Casey
  14. PSDfreak

    '97 IPR in SD HPOP

    :thanks
  15. PSDfreak

    '97 IPR in SD HPOP

    I just got my super duty HPOP ('99-'03) Part number ending in CRM...it did not come with an IPR...Will it accept my IPR out of my '97 HPOP?? Thanks, Casey
  16. PSDfreak

    fuel filter replacement ??

    The explanation at the top is perfect...I figured I would add my favorite fuel filter brand....Baldwin (PF7678), comes with the attached lid. :sweet -Casey
  17. PSDfreak

    Rear Axle Seal Blown Again!!

    Not a problem amigo...No worries ;tu ...Yeah you would think so... I guess thats the problem with working to fast to beat the darkness, you make simple dumb mistakes...Oh well... -Casey
  18. PSDfreak

    Rear Axle Seal Blown Again!!

    Thanks, that what I thought....Back to the parts store for another seal, then to the driveway for work in the unbareable heat! :rolleyes: -Casey
  19. PSDfreak

    Rear Axle Seal Blown Again!!

    Well I got the new seal in. Check the diff. vent and its clear, no blockage...however in my race against beating light last night, I think I installed the seal backwards!! If I remember correctly the "oil side" should face the bearings NOT the differential...For some reason I'm remembering now...
  20. PSDfreak

    Rear Axle Seal Blown Again!!

    Ok, well thats the way I put it in and thought I had done so by mistake...sounds like I am good to go though, thanks! -Casey
  21. PSDfreak

    Rear Axle Seal Blown Again!!

    The side of the seal marked "Oil Side" should face AWAY from the differential, not TOWARD the differential, right?? Thanks, Casey
  22. PSDfreak

    Rear Axle Seal Blown Again!!

    Will check the vent tonight when I replace the seal...My only thought on that is that why would it keep blowing out the NEW seal rather than the stocker on the other side?? Jim- This seal is the same style as the ungraded one from Ford and as I understand it a good solid seal...I got another...
  23. PSDfreak

    Rear Axle Seal Blown Again!!

    The burr idea what kind of what I was thinking...Any tips on getting that seal on perfectly straight??? Thanks, Casey
  24. PSDfreak

    Rear Axle Seal Blown Again!!

    This will be the third axle seal going on the truck this weekend...(4 if you count the stock seal)...and by the way this is in a matter of about 6 months! I am tired of changing these bad boys (but have gotten quite quick at it :cool: )...I am not sure what I am doing wrong?!?! I tried using...
  25. PSDfreak

    High Pressure Oil Crossover Line

    I definetely noticed the above mentioned effects...I think it was worth the few bucks...Let us know how it turns out for you:sweet

Members online

Total: 69 (members: 2, guests: 67)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top