Search results

  1. clintusaf

    Think I got my ECU wet

    Most Most of my fuses are under the dash and already checked all of those and some relays for the PCM. There are a few relays under the hood but havent checked them yet.
  2. clintusaf

    Think I got my ECU wet

    What does PDB stand for again?
  3. clintusaf

    Think I got my ECU wet

    THanks BigJoe. Good to hear from you again. Been awhile. I will get my heat gun and go ham lol. Got the truck back to the house so I could work on her now
  4. clintusaf

    Think I got my ECU wet

    Hey guys, today around 10 am i drive through about 36 inches of water while scoping out an area for a military exercise here in Italy. Later on went to run some errands, truck started and ran fine. Drove it about 5 miles, parked to run in some where and went to leave and all of a sudden I get...
  5. clintusaf

    4x4 grinding -and winter is coming!

    My vacuum lines looked fine. and the fact that my driver's side hub engages from the in-cab switch, I'm guessing the solenoid valve and vacuum pump are working correctly. So, I'm ordering all the items to service my hubs using Guzzle's how-to for the needle bearing lubrication and the front...
  6. clintusaf

    4x4 grinding -and winter is coming!

    tried this today big joe. didnt seem to help any.
  7. clintusaf

    4x4 grinding -and winter is coming!

    Hey guys, I need some help on this one. My truck has been doing great over here in Germany, and I want it to stay that way lol. I know the snow is fast approaching here and figured I should test my 4x4(I usually do monthly anyway). After switching to 4-high and making the first turn in the...
  8. clintusaf

    more charging system problems!

    Great point! And yes, they are rated to 106 mph. I usually dont break 100 though just to be safe. I was surprised how many people didnt know about tire speed ratings over here!
  9. clintusaf

    more charging system problems!

    Hey guys, Ive had my truck over here in Germany for about 5 months. No major problems until now. The other day when I pulled in the driveway, I noticed my pyrometer gauge not reading anything at all.(I always wait until it's at 350 degrees or below before shutting the truck off, especially...
  10. clintusaf

    Power Steering fluid added to brake fluid! what to do?

    Guys, I need help on this one. A buddy of mine added power steering fluid to my brake fluid while helping me work on my truck.:dunno I didnt think much of it because of the small amount of fluid he said he added. It's been about a month. My brakes are very spoungy now. Coming to a stop from...
  11. clintusaf

    new to the forum and 7.3 psd

    Welcome! How are you calculating your mpg? As far as things you can do maintenance wise, I would clean out your EPBS tube. https://www.youtube.com/watch?v=XLZI2wMpn5I http://www.guzzle7pt3.com/ebps.php As far as upgrades, you mentioned the top three, my suggestions four you budget would be...
  12. clintusaf

    power steering pump replacement?

    Picked up a P/S pump, both high pressure lines, and pulley removal tool from Napa today all for under $200 including the core charge. I really wanted to go motorcraft, but couldnt bring myself to spend $600 for parts. Plus I read good reviews about the napa one and it is supposedly quieter than...
  13. clintusaf

    help me choose how to prep my truck!!

    ok. what exactly is this trans-x stuff? does it remove air bubbles or something? and how can I measure to know I have sucked out half of the fluid?
  14. clintusaf

    power steering pump replacement?

    So are you suggesting I just repeat the flush procedure again? That sounds very similar to what I did to flush it. And on the coolant filter, do you mean the cooling filter like dieselsite or sinister diesel has? do you happen to know that the one on amazon is called?
  15. clintusaf

    help me choose how to prep my truck!!

    Well thanks big joe. I have tried to always put the best of the best in my truck when I can. Learned my lesson with that on those damn parts house starters lol!! anyway, yes you nailed it with the windshield and PS pump. those are the only two things I absolutely have to do before I go. and...
  16. clintusaf

    help me choose how to prep my truck!!

    So, most of you probably know by now, I am moving to Germany in January and taking my truck. Now most people look at me like I'm crazy when I tell them I'm taking it with me, but I have been there before so I know the area and what I am in for. Plus, I'm not ready to let go of my truck yet, and...
  17. clintusaf

    power steering pump replacement?

    well guys, after getting an assignment to Germany and deciding to take my truck, I have had nothing but problems with it lol!. but that's ok cause I'd rather them happen here in the states instead of across the big pond. anyway, I'm thinking I'm just going to replace my power steering pump...
  18. clintusaf

    Oil leak diagnosis

    So I have an oil leak coming down the back side of my motor and dripping off of my bell housing. I know the first step will be to use some purple power and clean it up the best I can and try to trace. I will be doing this. However, I know that the oil rail plugs are known to leak and arent too...
  19. clintusaf

    7.3L Powerstroke Large Oil Leaks Repair

    what is the part number of the updated plug you mention in the video? I just noticed a decent oil leak on mine and figured this is a good place to start.
  20. clintusaf

    Alternator replacement

    Jourdan, Thanks for suggestions. I actually just replaced my belt, tensioner pulley, and idler pulley. All Fomoco parts. I have heard about the dual alternator upper radiator hose and will be swapping that in before I ship the truck. Any other suggestions are all welcome. thanks alot.
  21. clintusaf

    Alternator replacement

    well, had the alternator rebuilt and installed. Everything seems to be running smooth now. Batts are charging like they should. I bought the extra regulator control board in case mine takes a crap in Germany. He said after beefing mine up, it tested at 170 amps. $200 for everything. Even painted...
  22. clintusaf

    Alternator replacement

    well, I called a reputable shop alternator shop today and they want $165 to rebuild mine. That also includes: a larger stator, heavy duty diodes and voltage regulator. They said it should be rated at about 180 amps after they are through with it. So, with that said, I will be having mine...
  23. clintusaf

    Alternator replacement

    ok. I'll see if they have one with a higher output at the stealership. if they have one that's compatible, I'll go that route. thanks guys.
  24. clintusaf

    Alternator replacement

    So my alternator is going south and I plan on replacing it with a motorcraft one, but first wanted to ask if there are any other highly recomended brands or options. So is motorcraft the way to go, or is there a better option in your guys opinion? Anything else that needs to be adressed while...
  25. clintusaf

    A/C problems....now what?

    Thanks for the info Dan. If I go the route you did, that will for sure come in handy. After talking to the guy here on base at the Auto hobby shop, and learning a bit about the basics of an A/C system, the option of just replacing my clutch and coil is making more sense to me.

Members online

No members online now.
Total: 102 (members: 0, guests: 102)

Forum statistics

Threads
30,510
Messages
266,056
Members
14,624
Latest member
Romie64

Latest posts

Top