Search results

  1. Earnies2

    I need HELP 7.3 oil pan change now will not idle....

    Ok i'm baffled..I just replaced the oil pan (cut the crossmember) also filled it with synthetic oil for the first time...truck has fuel leak at the return line...anyway it started and ran for about 45 seconds then the idle went to 1500 and the truck started to run really ruff ..it never had a...
  2. Earnies2

    Help Needed Glow plug relay not working (no ground)

    Turn key on GPR not cycleing......Power to it on the battery side....power from the ignition side....I can manually ground the relay it worked only with a jumper, and I also replaced it with a stancore no change....Swapped out the PCM to one i know works no change.I had the problem last year and...
  3. Earnies2

    Question Brake hold down help

    Rear dulie 12x3 brakes is thier a special tool for the hold down springs....thay are a PITA...why did thay change from the round spring and cup with the straight pin to this style....its a 97 F350 DRW 10.5 sterling :dizzy thanks
  4. Earnies2

    GPR not working HELP !!!

    Turn key on GPR not cycleing......Power to it on the battery side....power from the ignition side....I can manually ground the relay it worked only with a jumper, and I also replaced it with a stancore no change....Swapped out the PCM to one i know works no change.....Does any one have a scmatic...
  5. Earnies2

    trany time (again)

    Well out plowing and startted having problems....whean in reverse it felt like my brakes were sticking....than i notested in neteral the truck was chuggoin foward... so i took it easy for the rest of the storm and than pulled the unit....this is the 4 th unit ai have put in my truck 2 under...
  6. Earnies2

    making progress

    Well i'm making progress, all the new tool boxes finally came in . I had to cut out the lower face and the support rod for the door closer of the front and rear compartments to get the tool boxes in thay just fit the door closer support just touches the top of the boxes. I cut 2 more holes for...
  7. Earnies2

    Fuel line

    Is It possible to change the fuel lines that are on the back of the heads and go to the banjo bolt on the back of the fuel pump without removing the turbo?:rant
  8. Earnies2

    Spray in bedliner

    Any body have any experance with SEM spray in liner i want to install over dimond plate aluminum......:confused:
  9. Earnies2

    I Found a utility Body

    I was ready to buy a new one had the order form all filed out check in hand.$4300...then on craigs list I find a 3 year old Napiheid 9' the twin to mine in near perfect shape with diomand plate alumium in the bed and on the box tops with a trac rac he wanted $3500 I bought it for $1300 +$150 to...
  10. Earnies2

    97 F350 sell or rebuild?????

    I have a 97 F350 DRW 4x4 with a 9'utility body it has 84,000 miles See my pix.........My problem is that she is starting to rust out. the floors are going on the utility and the front crossmember on the utility needs replacing their are a few broken welds in the utility bed. underneath the cab...

Members online

Total: 317 (members: 1, guests: 316)

Forum statistics

Threads
30,512
Messages
266,061
Members
14,625
Latest member
woodrow58

Latest posts

Top