Search results

  1. cvdenson

    Oil cooler fix/oil filter stuck

    I just did this myself and I posted a writeup with pics here: Oil Cooler Reseal
  2. cvdenson

    Duplicolor DIY bed liner (Dupont kevlar)

    This product seems to be a big deal in the Jeep world: U-Pol Raptor Truck Bed Liner Kit - TP Tools & Equipment
  3. cvdenson

    Turbo-Master Wastegate controller install question

    I have it on my early bird. I found it easier to pull the turbo and then install it. It was well worth it in my opinion. The turbo spools quicker for me and I can adjust the wastegate as I see fit.
  4. cvdenson

    Turbomaster waste gate

    I got one on my early '99. I did notice faster spool. One thing I like is I can adjust it with a simple 11mm deep socket. I've got mine set to 25 psi but since I installed a Terminator modded 17 degree pump, I'm getting up to 26 psi now. This wastegate was beneficial to me because I have the...
  5. cvdenson

    Positive battery cable

    If you need battery cables read here: Help! Pos batt cable - APG Forums and contact Rowdy Racks in the thread. In our local club AZPSG, he sells these and they are more stout than the stock cables.
  6. cvdenson

    anyone running an oil bypass

    I have the Oilguard on my early '99 F350 for three years now. I've been happy with it. Since they sold themselves to the devil and now have jacked up their prices on the kit and filters, I went ahead and bought the Frantz Bypass Oil setup for my '02 Excursion. I just recieved the kit and am...
  7. cvdenson

    6 - speed?

    I have the 6sp and love it! I like to be in control of the rpms. My mileage is great. I'm getting between 18/19 in the city and 20/21 on the highway.
  8. cvdenson

    how to do ebpv gutting and aih deletein

    Can't remember the size, but you put freeze plugs in the holes. On my pedistal, I cut the rod and tapped the hole and plugged it.
  9. cvdenson

    Oil crossover line

    I have the ITP SS kit installed on mine as one of the first mods I did. I absolutely noticed no difference in the sound, smoothness, or performance. Chris
  10. cvdenson

    Racor CCV filter

    I can't believe no one repied to this. Very good write-up with pics. I didn't know this thing existed until you posted...Thanks! Chris
  11. cvdenson

    Clutch replacement

    Ditto what jestersv said. I bought the LUK clutch and have been happy since I put it in. The Southbend is awesome too. Chris
  12. cvdenson

    6 speed

    There is a drain plug on the drivers side of the tranny. Above that is the fill plug. You know it's full when you pull the fill plug and fluid comes out. Chris
  13. cvdenson

    latest edition

    Looks real good!! I just did the same thing myself yesterday after having my rear end completely out for a rebuild. Everything inside the pumpkin was toast. When I got it back, I wire wheeled the pumpking and axles and sprayed a few coats of semi-gloss black engine paint and put the '08 cover...
  14. cvdenson

    Exhaust?

    My bro in-law has the 4" motoblue and seems to like it. He did have a couple of fitment issues near the spare tire. I don't care for the way it exits behind the tire though. I have the MKO 4" and had absolutely no fitment issues and it looks good. The MKO was the best bang for my buck and...
  15. cvdenson

    Few questions about first half 99 7.3L

    The later style cupholder is a bolt in deal. Chris
  16. cvdenson

    Our first gig...

    How 'bout a bass player that plays classic rock, country, & bluegrass? hehe.
  17. cvdenson

    Dominator 66 on the way!!

    Kent, Where did you get your pedestal w/o the EBPV? I'm looking for the same pedistal for my truck since I have an oil leak coming out of the EBPV actuator. Chris
  18. cvdenson

    Grinding 5th ... or 6th.

    I have the same exact problem as you. In the spring I installed the LUK clutch kit and it grinded before and after going from 5th to 6th. I was told that my synchronizers may be going bad, but I also noticed my slave cylinder was bad. I'm just getting around to switching out the slave and...
  19. cvdenson

    Waste gate

    You know what? Everyone talks about how great it is to unplug the wastegate and that you'll gain 2-3 psi. I did it last weekend and lost 2-3 psi. I'm lucky if I can break 17 psi versus 20 psi when I had it hooked up. This is on a early '99 powerstroke diesel with only 12,000 miles on the...
  20. cvdenson

    Waste gate

    You know what? Everyone talks about how great it is to unplug the wastegate and that you'll gain 2-3 psi. I did it last weekend and lost 2-3 psi. I'm lucky if I can break 17 psi versus 20 psi when I had it hooked up. This is on a early '99 powerstroke diesel with only 12,000 miles on the...
  21. cvdenson

    MBRP 3.5" DP Install

    Hello everyone, Having some problems installing a 3.5" downpipe to my stock straight-piped exhaust. My truck is a early '99 F350 CC LB SRW 6sp manual trans. When I bought the truck I noticed the catalytic converter had been removed for a straight pipe with a ford serial number stamped on it...
  22. cvdenson

    Blower Motor Relay

    In the power distribution box under the hood, does anyone know what number is the blower motor relay? thanks

Members online

Total: 264 (members: 1, guests: 263)

Forum statistics

Threads
30,512
Messages
266,061
Members
14,625
Latest member
woodrow58

Latest posts

Top