Search results

  1. PSDfreak

    i hope i never have to change the glow plugs again!!!

    I get a quick puff in the morning when its cold, but just one puff then its clear. When its really cold (~15F) I will get a very light white smoke for about 2 minutes.
  2. PSDfreak

    Coolant Leak...Can't Find Source

    That a good idea...Although the "wet area" seems to be pretty localized...I'll check again in the morning and see what I can find with the engine running...Just have to remember where I put my ear plugs ;) lol Thanks, Casey
  3. PSDfreak

    Coolant Leak...Can't Find Source

    I was thinking the same thing regarding the HG blowing...I can't imagine that with what I have on the truck I would have blown one. I am going to check the cooler in the morning to make sure its not the culprit...The drops I found on the fuel line are FORWARD of the cooler though...They are...
  4. PSDfreak

    Coolant Leak...Can't Find Source

    Hey All, I just saw a couple of drops of coolant under the front of the truck....got the flashlight out and found there was coolant drops on what looks like fuel lines. These fuel lines are located DIRECTLY next to the driver side negative battery connection to the front of the block. All...
  5. PSDfreak

    best exhaust

    :sweet
  6. PSDfreak

    Hod To Replace My Power Steering Pump

    No problemo...hopefully it went well, OR if you haven't done it yet...I am sure it WILL go well! :grin -Casey
  7. PSDfreak

    Hod To Replace My Power Steering Pump

    If it is in fact the pump that is causing the problem and not the high pressure line coming out the side of it here is how to replace... When you go to get a new PS pump (I got mine from Autozone) Rent a pulley puller. Its a couple of bucks and very simple to use. That will get the pulley...
  8. PSDfreak

    Tricks to replacing HPOP and IPR

    Tricks to replacing HPOP and IPR....Yeah...dont crack the friggin FPR!!! -mad :sweet
  9. PSDfreak

    Fuel additives

    Good idea on the algacide.... I run Stanadyne Performance formula...helps mileage a touch (1.5 - 2 mpg depending on how I drive) and its peace of mind that maybe i'm helping the motor last longer... -Casey
  10. PSDfreak

    Centurian Power Stroke?

    Hey Don, I know this is an old thread but a month or so ago I drove past a '95 Centurion PSD in Colusa. White, looked real clean and dry underneath. My little brother just picked up a '95 F150 Centurion (Reg. Cab short bed made into a Crew Cab Short Bed)...REALLY clean conversion, unless...
  11. PSDfreak

    gas mileage?

    I just calc'ed mileage on the truck in my sig this mornin...Ran it through both tanks of fuel w/ stanadyne in both tanks...combination city/highway drivin (i'd say 1/3 city, 2/3 highway) avg about 65-70mph on the highway...got me 19.236 mpg! I am very happy with that...Oh, and that is on "TOW"...
  12. PSDfreak

    Manual locking hubs?

    Switch to the manuals...The auto hubs are junk...Getting out of the truck in the snow to lock the hubs can be a PITA sometimes, but it's MUCH better than being stuck because you trashed your auto's. And yes there is NO vacuum for the hubs...they are engaged by movement...The newer trucks have...
  13. PSDfreak

    new mods

    Me TOO! :sweet :roflmao
  14. PSDfreak

    Power steering problem

    There is a drop pitman arm on my truck...Does the stock pitman arm have any drop to it or is it completely flat? I dont have any reason to take th box off other than to check for the crack but maybe the original poster could check it out while hes at it. -Casey
  15. PSDfreak

    94 chip install

    I tried to do it the easy way but that didnt work (truck acted like I had done nothing after installing the chip) I took the PCM out of the truck and did what I THOUGHT was a good job of cleaning the contacts...Re-Installed PCM w/ Chip...No Dice, truck was stock.... Figured the chip was no...
  16. PSDfreak

    need a super duty humped HPOP?

    Yeah with the IPR thats pretty good...looks like no one bought it...Only thing I dont like it the fact that the guy isnt "SURE" how many miles are on it. I put a 17* pump in my truck about a month ago and am loving it. -Casey
  17. PSDfreak

    Power steering problem

    Hey Don, good to see you on the board! Anyway, one this I thought I might add as I think its on topic...I have been noticing lately that I have a creeking noise in the front end...Took it to a local front end shop to have it checked out. EVERYTHING checked out ok (Ball Joints, Drop Bracket...
  18. PSDfreak

    Installing Gauges Where To Put....

    Click HERE for some install instructions that may help. Good Luck and let us know if we can help with anything else... -Casey
  19. PSDfreak

    Installing Gauges Where To Put....

    Like the other guys said, PRE-Turbo is the way to go...much more accurate. The pic above is spot on. -Casey
  20. PSDfreak

    New fuel filter housing on ebay

    Yeah they are pricey...I would email the guy and makes sure you are getting the FPR and wiring harness too...they are in the pictures but not mentioned in the description...or if you don't care one way or another then you're all set. :thumbs
  21. PSDfreak

    Interest in a Full Trim Replacement Pillar Pod?

    I have never seen something like this for the OBS trucks...The SD Pillar Pods I have seen DO look better...haven't gotten up close to one so I am not sure how they are compared to the OBS pods... Anyone know of another pod that clips on rather than you drill and use those dumb plastic "Pine...
  22. PSDfreak

    Interest in a Full Trim Replacement Pillar Pod?

    I brought this up over at TDS and tates and I spoke through PM (he is the "other" guy I was referring to at the top of this thread). So far we have yet to find somewhere that wants to make this bad boy... :dunno
  23. PSDfreak

    Interest in a Full Trim Replacement Pillar Pod?

    I think that too...Looking at where they should sit flush there is a small gap no matter what...makes it look like it was designed to fit more than one application IMO. -mad -Casey
  24. PSDfreak

    Interest in a Full Trim Replacement Pillar Pod?

    I am tired of the "cover" 3-Gauge Pillar Pod that fits OVER the trim piece. I think that a pod that completely replaces the trim piece on the pillar would be the way to go. The cover type just doesn't look very streamline in my opinion. I have search high and low and talked to many people, no...
  25. PSDfreak

    Power steering problem

    You cannot get to the 3 bolts unless you have the pulley off. Same goes with putting it on. You have to bolt the pump into the truck before you put the pulley back on. I think if you really try you can get to 2/3 bolts with the pulley in place, but the 3rd one is not possible to reach...

Members online

Total: 94 (members: 1, guests: 93)

Forum statistics

Threads
30,512
Messages
266,061
Members
14,625
Latest member
woodrow58

Latest posts

Top