Search results

  1. psdan000

    what do ya'll think?

    i didnt see anywhere where you had said if you have an auto or 5spd? after i did DIY stage 1's my auto tranny took a dump not long after so you may want to take that into consideration too.
  2. psdan000

    headlight knob (not an "engine, drivetrain, & chassis quest)

    you could do what we did on one of my dads old work trucks and just snap a pair of vice grips on her! other than that if bending it back doesnt work i think you can get a new knob at the dealer. maybe try looking in a junkyard too.
  3. psdan000

    warn premium hubs.......

    havent heard of superwinch...dont know about them being any stronger than the warns but warn makes some pretty good stuff. milemarker hubs are supposed to be pretty good too. good luck to ya.
  4. psdan000

    warn premium hubs.......

    heres what the new spindle nuts look like that you'll need: http://quad4x4.com/images/qk4727.jpg
  5. psdan000

    warn premium hubs.......

    you will need the different hub/spindle nuts for the manual hubs. check ebay for a good price i see them on there a lot.
  6. psdan000

    STACKED!!!!!! again

    yea Ryan, SOMEDAY you will be cool enough to join the stacked club:tounge
  7. psdan000

    Detergent additive that wont score my p's and b's?

    brake parts cleaner and a scotchbrite pad work wonders. jim suggests using brake parts cleaner in his DIY write-up. when i had mine out mine were also clean with about 170k on them, had never been out before that.
  8. psdan000

    One day maybe.

    the most ammusing are the ricer guys. theres a guy here at work that swares up and down that his friend has 1200hp in a front wheel drive car:roflmao...of course he also brags that his eclipse can do a 19 second 1/4 mile:lmao :hail. my buddy also has a dodge 24v with some mods and he talks crap...
  9. psdan000

    My first ever dyno run

    been running my DIY's for awhile now with no problems. Jim is a great guy to deal with and he wont steer you wrong. i ended up breaking a nozzle when doing mine and he overnighted one to me free of charge. as long as your injectors are in good working order to begin with i think you'll be...
  10. psdan000

    Joke of the day

    found this one on another forum...pretty funny Q. What did the auto parts counterman say when the customer said, "I'll take a set of wiper blades for my Chevy"? A. Sounds like a fair trade.
  11. psdan000

    DIY injectors and DYNO results

    still running stock oil...need to upgrade to a SD pump though bc if i get on it hard enough i will get a CEL...could be bc of a worn out oil pump though.
  12. psdan000

    lowering F-350 4X4

    hey Russ, check your messages! Dan
  13. psdan000

    DIY injectors and DYNO results

    didnt have any broken nozzle springs, all were in good shape. in fact all the injector parts were in excellent shape upon teardown, just a little dirty. cleaned the nozzles with brake parts cleaner as recommended per Jim in the DIY kit and sprayed them out with an air compressor. then took a...
  14. psdan000

    DIY injectors and DYNO results

    i broke the nozzle on the second injector...i didnt put something together right in the very bottom injector. i think maybe one of the dowel pins or something and when i was screwing the 2 halves together, it got really tight really quick and it just popped. so just be careful putting all the...
  15. psdan000

    DIY injectors and DYNO results

    no they are not flow tested. that is the only disadvantage to they DIY injectors. but if everything is in working order and the pistons are machined correctly (yes i did go with the pre machined pistons, 150cc's) then they should all flow the about the same. ive now put about 500 miles on them...
  16. psdan000

    DIY injectors and DYNO results

    sorry i havent posted this over here yet...anyway got my DIY injectors built and in. man what a learning experience. heres some pics of the inside of the injectors for your enjoyment. http://community.webshots.com/album/551435157ZsKiIg not the greatest pics but you get the idea. also had...
  17. psdan000

    Ok i forgot......

    i ordered a kit a couple weeks ago, i was very impressed. havent got around to doing them yet though.
  18. psdan000

    fuel filter

    if you have an oil filter wrench that fits on your oil filter it will work on the fuel filter too. its what i use every time and works like a charm.
  19. psdan000

    Grizz vs Man

    LMAO:roflmao
  20. psdan000

    Trany

    my truck was just the opposite. always shifted hard until i put a chip in it. still shifts hard everyonce in awhile but not like it did. wonder what your PCM code is? mine was NAW4 and i heard that code does have some hard shifting. the code is printed on the dust cover on the PCM shown above
  21. psdan000

    Headed out in the morning....

    not fair...
  22. psdan000

    Cleaning Engine

    i wouldnt recommend using high pressure but i know people have done it before without problems. what i do is use simple green automotive and spray it over the entire engine (make sure its warm) and let it soak for about 10 minutes and rinse it over with low pressure. when i first did mine i...
  23. psdan000

    More Girl Problems???

    hey man glad to hear things are kinda working out. we all hope for the best for ya. just noticed you are a SLAPS member. is YTEE on this forum? you should come down for the powerfest rally this year (if we even have it). a lot of the FOKISD and SLAPS groups were there last year...just ask ytee...
  24. psdan000

    Take a loan out for truck

    what about taking a loan out on a new truck? whats the difference really other than interest rates? eventually im probably going to have to do it. but i can put it off for a lot longer if i just put some money back into my truck. im sure it has a lot of engine life left in it. and most people...
  25. psdan000

    Take a loan out for truck

    not a bad idea, didnt think of that one. injectors are already paid for. already have a chip and one of the guys around here has the ability to reprogram my chip for free so ive tried a lot of different tunes. ill look into the student loan though. thanks for the tip

Members online

No members online now.
Total: 128 (members: 1, guests: 127)

Forum statistics

Threads
30,516
Messages
266,069
Members
14,627
Latest member
castellscl

Latest posts

Top