Recent content by bdp

  1. B

    stealth HPOP issues again!!!

    For best results use 2 IPR's and 4 output lines but you still shouldnt have those problems with 1 IPR and 2 lines, problem that may come up is the stalling issue. You wont blow a gasket with the new design with 2 IPR's. Not sure why you have so many problems with that setup Rich, we have...
  2. B

    stealth HPOP issues again!!!

    Running two lines or four? 2 IPR's right? Make sure you pulled all of the check valves out. If running 4 lines make sure you have each pump feading both heads.
  3. B

    Compressor Wheel

    Get the whole 1.0 housing kit with the wheel for the best performance.
  4. B

    New fuel filter housing on ebay

    I usually have one or two take offs in the shop if someone needs one, I usually charge 100.00 for them.
  5. B

    BDP High Performance turbo

    Sending turbos in for mod is not something we will make a habit of but since rooster already has alot of stuff done to his turbo then it would be better for him to just send it in for us to work over. The mods he has already should work great with the new turbo setup. And yes, less then...
  6. B

    BDP High Performance turbo

    Thanx Crumm, also for those in need get in on the "name that turbo" contest and if you win get a big discount on it. There are details on my website. So far the testing results have been stellarmajor egt drop and hp increase on a Stage II truck and also major egt drop on a Stage I SD truck...
  7. B

    and the saga continues

    Filters, CarQuest # 86911 and 86912. Dunno whats goin on with it Richie, Only thing I know to do is rip the mfers back out and send them down, if they all flow good then I might just send a completly differnt set to ya, maby there is soemthing in those that wont show up on testing but will...
  8. B

    something blew

    Dann, sorry to here about ya getting stranded, unfortunatly blowing a line out is common, the metal that they use in the pump housings are pretty crappy and if they are overtighetned or strained at all they will blow right out. If you would liek we have some new updates for your pump system...
  9. B

    fuel hose specs?

    -4 AN or 37 degree JIC
  10. B

    Twins or one BIG ONE?

    I am using big singles on everything. Twins can make the power but the PITA factor is very heavy with them, pulling turbo and pipes to get to a valve cover is just not cool. Parallel twins are not the answer at and dont even hit my radar, you want monster boost and that wont cut it, two stock...
  11. B

    ITS DEAD!!!!!!!!!!!

    Rich, sorry to hear about the motor. The cylinder wall is probably cracked length wise from the piston rocking in the bore, I speak from experiance on that one. I might be able to get you a VERY good deal on either just a block or a full reman kit with a block or a complete short block...
  12. B

    Injector Recommendations

    The flowbench is in, be operational tomorrow.
  13. B

    http://www.diy-injectors.com

    The 160cc rating is if you have enough pulse width to empty the injector it has the capability of flowing 160cc. Not sure what is meant by the whole need hybrids for over 165cc, only need for hybrids is to get more fuel by using less hpo. Maby what ya meant was because the oil pressure is...
  14. B

    Slightly used set of forged rods for sale

    Ya I am workin on some cool stuff that may make the PSD a competitor this year, we'll see. Gotta get a bottom end together first.
  15. B

    Slightly used set of forged rods for sale

    I Am pretty sure one more power run on it would of sent #7 threw the block. I put together an engine to test some things for the upcoming pulling season, a type of cam configuration, a single turbo and with some 400cc injectors. I think it worked cause only got a few runs on her before it...
See more

Members online

No members online now.
Total: 144 (members: 0, guests: 144)

Forum statistics

Threads
30,510
Messages
266,056
Members
14,624
Latest member
Romie64

Latest posts

Top