Search results

  1. B

    stealth HPOP issues again!!!

    For best results use 2 IPR's and 4 output lines but you still shouldnt have those problems with 1 IPR and 2 lines, problem that may come up is the stalling issue. You wont blow a gasket with the new design with 2 IPR's. Not sure why you have so many problems with that setup Rich, we have...
  2. B

    stealth HPOP issues again!!!

    Running two lines or four? 2 IPR's right? Make sure you pulled all of the check valves out. If running 4 lines make sure you have each pump feading both heads.
  3. B

    Compressor Wheel

    Get the whole 1.0 housing kit with the wheel for the best performance.
  4. B

    New fuel filter housing on ebay

    I usually have one or two take offs in the shop if someone needs one, I usually charge 100.00 for them.
  5. B

    BDP High Performance turbo

    Sending turbos in for mod is not something we will make a habit of but since rooster already has alot of stuff done to his turbo then it would be better for him to just send it in for us to work over. The mods he has already should work great with the new turbo setup. And yes, less then...
  6. B

    BDP High Performance turbo

    Thanx Crumm, also for those in need get in on the "name that turbo" contest and if you win get a big discount on it. There are details on my website. So far the testing results have been stellarmajor egt drop and hp increase on a Stage II truck and also major egt drop on a Stage I SD truck...
  7. B

    and the saga continues

    Filters, CarQuest # 86911 and 86912. Dunno whats goin on with it Richie, Only thing I know to do is rip the mfers back out and send them down, if they all flow good then I might just send a completly differnt set to ya, maby there is soemthing in those that wont show up on testing but will...
  8. B

    something blew

    Dann, sorry to here about ya getting stranded, unfortunatly blowing a line out is common, the metal that they use in the pump housings are pretty crappy and if they are overtighetned or strained at all they will blow right out. If you would liek we have some new updates for your pump system...
  9. B

    fuel hose specs?

    -4 AN or 37 degree JIC
  10. B

    Twins or one BIG ONE?

    I am using big singles on everything. Twins can make the power but the PITA factor is very heavy with them, pulling turbo and pipes to get to a valve cover is just not cool. Parallel twins are not the answer at and dont even hit my radar, you want monster boost and that wont cut it, two stock...
  11. B

    ITS DEAD!!!!!!!!!!!

    Rich, sorry to hear about the motor. The cylinder wall is probably cracked length wise from the piston rocking in the bore, I speak from experiance on that one. I might be able to get you a VERY good deal on either just a block or a full reman kit with a block or a complete short block...
  12. B

    Injector Recommendations

    The flowbench is in, be operational tomorrow.
  13. B

    http://www.diy-injectors.com

    The 160cc rating is if you have enough pulse width to empty the injector it has the capability of flowing 160cc. Not sure what is meant by the whole need hybrids for over 165cc, only need for hybrids is to get more fuel by using less hpo. Maby what ya meant was because the oil pressure is...
  14. B

    Slightly used set of forged rods for sale

    Ya I am workin on some cool stuff that may make the PSD a competitor this year, we'll see. Gotta get a bottom end together first.
  15. B

    Slightly used set of forged rods for sale

    I Am pretty sure one more power run on it would of sent #7 threw the block. I put together an engine to test some things for the upcoming pulling season, a type of cam configuration, a single turbo and with some 400cc injectors. I think it worked cause only got a few runs on her before it...
  16. B

    Slightly used set of forged rods for sale

    Well here you go, a 1 off customized set garranteed to lower your compression. I will even throw in the piston that was broke at the wristpin. :sweet By the way, my truck was still running and parked its self in its spot in the shop under its own power, I think one more power run would...
  17. B

    Slightly used set of forged rods for sale

    http://community.webshots.com/photo/526717715/2964014030036595511OZKuwc http://community.webshots.com/photo/526717715/2871953560036595511sOIHcb Make some one a real good deal LOL. :roflmao Only got about 8 mile on them this last time around. It was fun while it lasted, wish they would...
  18. B

    bdp open House and dyno day- March 25th

    Suggested places to call for a room. Coming I-24 from the North Murfreesboro TN Fairfield Inn & Suites 615-849-1150 Ho-Jo (Howard Johnson) 615-896-5522 Ramada Limited 615-896-5080 Quality Inn 615-890-1006 Coming from south on I-24 Manchester TN Hampton Inn 931-723-6363 Days Inn...
  19. B

    bdp open House and dyno day- March 25th

    Yup its true, we are having an open house and dyno day on March 25th! We will have all you can eat and all you can drink and plenty of room for everyone. Diesel Performance Motorsports will be doing the dynoing with his portable DynoJet, thanx David. So come on Ford boys, come show some...
  20. B

    Van Turbo?

    That would be a cool before and after dyno, might knock a little off for ya if I get that #.
  21. B

    stealth HPOP from BDP

    Thanx all for teh kind words, just do what I can. ;)
  22. B

    stealth HPOP from BDP

    I said all this on TDS but will spill it again for you guys. We had a couple issues with teh stealth pumps with misalignment of the rear pump and the coupler, this created a side load and broke a coupel shafts, couple couplers. So I stopped selling them for a bit while a new design has...
  23. B

    truck is down, please help

    first check if pump is running. If it isnt check fuses and inertia switch.
  24. B

    What clutch for Beans stage I

    Better sooner then later. Went to put a clutch in a locals truck and housing was cracked 3/4 the way around. Been into that truck twice now and gotta do it again this week. Put a standard Luk kit in, got it from SBC, disc material sucked and was too grabby, come to find out Peter dont liek to...

Members online

No members online now.

Forum statistics

Threads
30,506
Messages
266,043
Members
14,622
Latest member
rhensonsr
Top