Search results

  1. MUDWHISTLE

    anybody recognize this from a 6.0 oil cooler?

    Anyone recognize this brass check valve? i found it in the oil cooler housing under the cover that houses the drain back valve. far as i can tell it doesn't come from the oil cooler housing by the pictures ive found. but it fell out when i turned the cooler housing over. everything seems to be...
  2. MUDWHISTLE

    Sinister Oil cooler good? bad?

    Has anyone used the sinister oil cooler in their 6.0's are they good bad or what? I did one a while back for a guy and used one and the part looked of good quality but the box it came in kinda had that tell tale sign of a box from China you know the ones. I didn't have any trouble with it but...
  3. MUDWHISTLE

    fuel pressure test port

    Does anyone know what the threds are for the test port on the 6.0 fuel regulator? I don't have time to get one but have acces to all sorts of fittings or can make one, need to check out a 6.0 friday and don't have time to buy one offline? thanks.
  4. MUDWHISTLE

    STC fitting

    IS there a writeup or a video on here about changing the stc fitting and the dummy plugs, I'm going to be doing one and would like to make sure I have most of the tools on hand, I have a pretty good selection of metric tools but just wanted to make sure I have everything. and tips or tricks to...
  5. MUDWHISTLE

    CPR fuel system

    Hey I have a friend that is wanting to install this on his 97 and it looks like a good system but seems a lttle spendy. I know the parts would not cost that much but does anybody know who makes the lift pump and the dpr uses? it looks like a superduty lift pump? also would like to hear from...
  6. MUDWHISTLE

    Convertor lockup

    what wire is for the convertor lockup or what color and what could a cause a 97 not to lockup ever? if there was a broken wire to the lockup solenoid would it show a code for the circuit being open? also is this a energize to lockup or is it deenergized to lock up, the reason I ask is my...
  7. MUDWHISTLE

    Heater valve?

    Hey everybody. I was helping a family member today removing his exhaust from his 06 cclb and when I was undoing the downpipe from the turbo I noticed the hot water valve was leaking, I may have bumped this but if I did it sure wasn't very hard. it was coming out of the stem where the arm...
  8. MUDWHISTLE

    Blinker

    I have a left blinker staying on for along time when I start it up and the blinker was not of in the first place or when I shut it down. if I push forward and and move it up and dawn I can get it to shut off after a bit but sometimes it wont shut off for along time. any ideas?
  9. MUDWHISTLE

    Clutch rod?

    Where is the cheapest place to buy the heim joint for the clutch rod repair?
  10. MUDWHISTLE

    Glow plug relay's

    I have a question about the relays for the glow plugs what are the two of them for and which one does what? the engine is having a hard time starting and not sure which one to replace? the guy replace the one, the shorter of the two I think. also what are the part numbers from Napa or...
  11. MUDWHISTLE

    Hard start and OD off light flashing?

    My buddies dad has a 200 f350 with over 200k on it. he asked me to see if I could help him figure out what the problem is so here goes. He said when he starts it when it is cold it will die after a few seconds of running but before it completely stops it catches it self and fires up again on...
  12. MUDWHISTLE

    wipers

    anybody know why my wipers go too far in both directions? they hit the aluminium pieces around the windshield I haven't torn into this yet but I cant see how they would go farther inboth directions then they are supposed to? thanks
  13. MUDWHISTLE

    fuel filter light

    What would cause a fuel filter light to stay on in this cold weather ever if the filter is new and goes out for a few seconds after removing and reinstalling the filter and then starting it up again? thanks Lee
  14. MUDWHISTLE

    smoke switch?

    Is there a way to do a smoke switch on an OBS if so how and has anybody done and how well does it work? Thanks
  15. MUDWHISTLE

    Speedo

    Hey guys I'm having trouble with my speedo, its rapidly flucuating when I get above 45 or so and if I'm going 65 it will swing from 65 to 45 then 50 and so on and really rapidly like it constantly is moving back and forath, I just rebuilt the reareng and replace the sensor after a wekk of...
  16. MUDWHISTLE

    gauges?

    wheres the best place to put the trans temp and the boost pressure fitting on a 2004 6.0 I know where to put the pyro but want to make sure that I get the right place for the other two? thanks Lee Pictures would be a great help.
  17. MUDWHISTLE

    trans problem.

    well I have trans problems again this time I know its internal sounds like it has some teeth missing on the input or something. I think Im gonna put it out and rebuild it but one question I have is will the tcase I have bolt up to and work with a zf six speed? just a route i was thinking about...
  18. MUDWHISTLE

    hyd clutch

    anybody have trouble with the hyd clutch clave and master cylinder in their obs? mine went out and I'm wondering if I should try to find an aftermarket heavy duty one or just get a napa or ford stock one. I don't think its been replaced in 220k. need to see if anyone has run across this and what...
  19. MUDWHISTLE

    Diff lock

    Anybody ever out new clutches in the locking rear diff of their F350 obs? Mine use to put even power to the rear wheels but now it seems that its more right wheel dominant. A friend of mine has the same rig and his doesn't seem to work at all cause t won't even spin both rear wheels in snow most...
  20. MUDWHISTLE

    slave cylinder

    anybody ever run into this? It seems that my slave cylinder really wants to creep out after my foot is off the clutch and is causing enough pressure to keep the throwout bearing spinning on the pressure plate. prevously I had a helper spring making sure it was drawn back to keep the throwout...
  21. MUDWHISTLE

    new clutch

    well as some of you may remember I had to put a new clutch in my ford with the cummins in it. I did everything the instructions said it came with a new flywheel and pressure plate disc bearings and everything. I did the 300 mile break in period with lots of city driving and on and off the clutch...
  22. MUDWHISTLE

    clutches

    need to know what the best clutch everybody seems to be going with and happy with. my goal someday is to have a 1000 ft lbs so thats what I will be needing this time. I think the one I just tore up was a rebuilt or cheap one. thanks lee
  23. MUDWHISTLE

    trans manual

    I need the trans manual for the zf 5spd, I got the 6 speed one form a guy on here but I can't seem to find it. anybody have I can print out on pdf? the one for the 6 spd was a really good one from ford. thanks lee
  24. MUDWHISTLE

    trans died

    well I have a big problem now, I was getting on the freeway and this morning and in third gear when I loud bang and it popped out of third gear. I tried to put it back it nad it wouldn't stay. so I stopped and tried to back up on the off ramp and it moved a couple feet and finished off whatever...
  25. MUDWHISTLE

    after market parts,

    I'm am stsrting to find it hard to to get parts for my 1992 F350, anybody have a good source for parts? thanks

Members online

No members online now.
Total: 294 (members: 0, guests: 294)

Forum statistics

Threads
30,512
Messages
266,061
Members
14,625
Latest member
woodrow58

Latest posts

Top