Search results

  1. mrziggy

    degas leaking, not again!

    I had head gaskets with studs done about a year and a half ago. Now the I am getting leaks at the degas cap again. Changed the cap with little change. It is a small leak most of the time. I can't seem to make it any worse by working it harder, but it does seem to get better and worse all by...
  2. mrziggy

    Whats fuel prices around you?

    Its been $3.99 for a fair time in far west central Wisconsin. Seems a bit unfair when the same station has regular gas at 3.25
  3. mrziggy

    Level

    The 05 350 has always had a bit to much sag in the from the get go. the warn bumper only made it badder than it was. now with 170K on it it is just getting rediculus. What should I do? Level kit? 450 springs? some sort of lift? what are your thoughts for gettin a mean stance out of the thing?
  4. mrziggy

    old problem new again

    Had long start issues a while back. Went away whenanged the oil filter. The problem came back a month ago. Oil,Oil filer, and fuel change didn't help. Banks didn't show any codes, and all the temp sensors showed accurate. Took it to the local diesel shop.(Not a dealer) They said it was taking...
  5. mrziggy

    Question What did you do to your truck today?

    Changed fuel filter, changed oil filter:coffee Fixed another rust spot!:doh: At least it's a white truck and easy to paint
  6. mrziggy

    pyrometer

    How do I drill a hole in the manifold without getting metal bits in? My fear would be shavings running through the turbo.
  7. mrziggy

    pyrometer

    I am finaly thinking of programing my truck. Pyrometer should be coming in the mail any day now. Were should I put the probe, and how hot is to hot?
  8. mrziggy

    long cranke time

    new development Ran it hard pulling the trailer this weekend, now the problem is gone. Could it have been EGR related?
  9. mrziggy

    long cranke time

    will running it this way damage anything? Gota long trip planned this weekend, but don't want to trash anything. I will try getting it scanned today
  10. mrziggy

    long cranke time

    About a week ago my 05 f350 started to take 2-3 times more cranking time. Its not cold anymore. lows in the 50s. If it sits for 6 or more hours, it crankes quick for twice the normal time, than fires rite up. No check engin or anything. Just changed the fuel filters but that didn't help...
  11. mrziggy

    Injector cleaning Hot Shot's Secret

    I definitly agree with the previous posts. Stand on it long and hard at least once a week.;tu Don't have much experiance with oil additives, but will say I have been real happy with Amsoil. Big differance in cold start, and smooth idle.
  12. mrziggy

    4x4 not going in

    The saga continues After some lookin today, I dont't think the solinoide is applying vacume. 1)The incoming line has plenty of vacume and the line to the hubs holds vacume just fine. 2)When I pulled the plug, and tried it with the test light, I get power in the center pin all the time, but...
  13. mrziggy

    4x4 not going in

    All seems to work right. I did notice a short bust of air through the defrost when coming off of the off position.
  14. mrziggy

    4x4 not going in

    So with the truck running I ran it from defrost over to max air. I don't get any air from defrost when it is set on max air or air. What should I try next?
  15. mrziggy

    Question Lots of lights

    Gentelmen, I would like to put a light bar on top of the topper and some work lights off the back for the upcoming hunting season. The goal would be to have the two light sets indipendantly controled from the cab. It would also be nice to have disconects for taking the topper off in the...
  16. mrziggy

    Is it safe?

    ;tu;tu;tu;tu;tuThanks
  17. mrziggy

    Leveling Kit for 05 F350

    Let us know how it goes. I am thinking about doing the same thing, so I would like to hear what toubles there are. Good luck
  18. mrziggy

    Is it safe?

    So I got a line on a real cheap 20 ft shipping container. It’s about 200 miles away. The trailer is a 7000lb 20ft deck-over Car Hauler, Wood Floor, Deckover ATV Package, Johnson Trailer, Colfax Wisconsin The two questions are. 1) how do I get it on the trailer without hauling something...
  19. mrziggy

    Coolent Change

    Are the old school antifreeze testers still acurate with the new school gold coolent? If 4 gal drains out, and 3 gal anifreeze and 1 water is added then including the 3-4 caught in the engin I should be gettind -34 not the maxed out --47 my gauge is showing, right?? motor and heater hold 4?:dunno
  20. mrziggy

    Coolent Change

    Ok so I got 4 gallons of Premium Gold and distilled, but just a bit unsure of the steps. Please confirm I have this right. 1) Pull lower radiator hose and let the system drain. 2) Fill water only in the degas bottle only, don’t have to worry about filling radiator? 3) Run the truck around...
  21. mrziggy

    4x4 not going in

    Last night I couldn't get the 4x4 to go in. The light would come on but not go in. If I lock it at the hubs it would work fine. What is the process for troubleshooting this?
  22. mrziggy

    nearly stranded

    Update This morning the gauge was normal. I called the shop to get their take. They suggested getting a fuel pressure gauge and waiting for it to happen again. Thoughts/Suggestions?
  23. mrziggy

    nearly stranded

    is it responsible for more than the gauge and low fuel light?
  24. mrziggy

    nearly stranded

    About 1/8 tank, after adding 25 gal the gauge showed just over 1/4. On that note, if the gauge is actin goofy, maybe it was lower than I thought???
  25. mrziggy

    nearly stranded

    not again! Aw crap. one month to the day!!! it happened again. This time I had just stoped to fill with fuel. After the fill I started and moved it to the front of the shop and shut it off. After being inside for maybe 5 min it started with a rough idle, and the fuel gauge had hardly moved? It...

Members online

Forum statistics

Threads
30,510
Messages
266,056
Members
14,624
Latest member
Romie64
Top