Search results

  1. Rex-a-FORD

    New Skin..

    Me likey.....Clean and easy to read!
  2. Rex-a-FORD

    OK, Single Shots, Here We Go!!!!

    Well good luck with getting the idle smoothed out. Keep us posted on your progress.......... Some day I'd like to possibly follow your lead on the single shots....
  3. Rex-a-FORD

    What was your very FIRST car?

    My first car was a 1947 Plymouth Business Coupe. Flathead 6 Cyl., 3 Spd. Stick, 3 Passenger, $200.00 back in 1962. Looked like this one only mine was black.
  4. Rex-a-FORD

    OK, Single Shots, Here We Go!!!!

    Hey Kent, How bout' an update on how the single shots are doing. Did ya' get the idle smoothed out?
  5. Rex-a-FORD

    remote starters

    Most of the remote starts for diesels this day and age use a time delay to allow time for the glow plugs to do their thing.
  6. Rex-a-FORD

    Loud Squeel Noise Under Dash

    Have you added or repositioned anything on the outside of the truck. Maybe change d or added an antenna. Anything that would affect airflow over and around the cab. If so, you may have created an area where a harmonic could develop and create the noise your hearing. I know ya' said it was...
  7. Rex-a-FORD

    Happy Thanksgiving

    :thumbs Happy Thanksgiving Everyone. :thumbs :) - - Hope everyone has a happy and safe Holiday. - - :)
  8. Rex-a-FORD

    01 Diesel Dies while driving..Total loss of power

    How old are your batteries........one of them might be intermittently shorting out..... Alternator could also have an intermittent short.........
  9. Rex-a-FORD

    Hub assembly prices?

    Thanks for the heads up on this thread Tail_Gunner. I installed a 99.5 hub on my early 99 using the early 99 rotor. TailGunner is right, there is about an 1/8' difference in the hub offset, not rotor diameter. All I had to do to make the early 99 rotor work with the 99.5 hub was to shim the...
  10. Rex-a-FORD

    PCM upgrade

    If I remember correctly, the California trucks have an electronic glow plug module rather than just a solenoid like non-California trucks. I believe that's why the PMTn XLEn series PCM's aren't compatible............
  11. Rex-a-FORD

    Mark Martin To Drive A Chevy Parttime In '07

    Yeah, I hear ya'.....kinda popped my balloon too. I just don't think I can root for a chebby to win. I like Mark, but ........................
  12. Rex-a-FORD

    fuel additives

    I also use use Power Services. Readily available and reasonalby priced.
  13. Rex-a-FORD

    got my brothers 99... performance questons

    First and foremost get a good set of gauges and you're on the right track with a Tymar intake..............then I'll put my vote in for a one of Jody's multi-position http://www.dp-tuner.com/ chips I've got one of his six positions...........lot's of power and low EGT's...
  14. Rex-a-FORD

    front brakes

    Remove two bolts holding the caliper on. The pads will stay in place in the bracket that the caliper bolts onto. Just roll 'em to the side and the pads will come right out. You'll prolly have to push the caliper pistons back a littel, Just use a C-clamp and one of the old pad to push the...
  15. Rex-a-FORD

    Yes or NO on the Muffler

    Yup, the guys are right.............go with no muffler..........
  16. Rex-a-FORD

    Changing Rear Disc Brake Rotors on a Daullie

    I bought mine from a local auto parts store "Arnolds Motor Supply". Looks like they might go by "Auto Value" in Texas. A little on the pricey side.............$46.00 plus tax, but it worked slick. Here's a link to Lisle Tools. They specialized in automotive tools and products.
  17. Rex-a-FORD

    Changing Rear Disc Brake Rotors on a Daullie

    Keep in mine this is a duallie, not a SRW. Well, had to go out and buy a special locknut tool for the rear axle hub locknut. It was a Lisle 28000. Ratcheting Lock Nut Tool Double-Ended for Both Sizes of Ratcheting Style Lock Nuts. Two tools in one! Small end fits Ford 1986 to 1994 light...
  18. Rex-a-FORD

    Fitting for fuel pressure guage

    This should be what you need: Fuel Pressure Gauge Adapter
  19. Rex-a-FORD

    Changing Rear Disc Brake Rotors on a Daullie

    Has anyone changed the rear disc brake rotor on a duallie? If so what has to be done to get the rotors off? Do I need to take the hub apart/off. Do I need any special tools? Haven't looked yet just gettin' ready to start.
  20. Rex-a-FORD

    Single shots are in, but running rough.

    Yup, good luck gettin' her goin'. I agreed with BBB, Jody is the man........... Keep good notes on what it takes to get everything worked out....maybe you can write up DIY article.............. Personally I like the sound of the singleshots better than the splitshots........ Anyway...
  21. Rex-a-FORD

    Difference between 99 and 99.5?

    Sounds to me like your truck was ordered with the "cold weather delete option". It was an option available when the 99 Superdutites first came out. The option was eliminated fairly early on and hasn't been available for years. Here's a link to a little history lesson: Cold Weather Delete Option
  22. Rex-a-FORD

    It's officially spring

    Yup, started snowing last nite, still going at it..........only about 3/4", but come on..............give me a break.......:eek: I'm ready to go dirt track racin':thumbs
  23. Rex-a-FORD

    Bypass filter blow out, left stranded 3 times!

    Did the area where the filter o-ring seats look different than the Amsoil unit. Just curious if there was anything to help hold the o-ring in place?
  24. Rex-a-FORD

    Preferred Guages

    Sounds like whoever told you that the fuel pressure would be really high is cornfused.............Get a 0 -100PSI electric fuel pressure gauge for your pillar. A 0 - 1600* pyro is about right if you go pre-turbo. Pre-turbo seems to be the most recommended way to install.
  25. Rex-a-FORD

    idle speed increase?

    Since you have a 6 speed instead of an automatic tranny, you'd have to set the emergency brake with the truck in neutral and then wait a few minutes for it to idle up. All Superduties 99 and newer will idle up under the right conditions.

Members online

Total: 134 (members: 2, guests: 132)

Forum statistics

Threads
30,516
Messages
266,068
Members
14,627
Latest member
castellscl

Latest posts

Top